Exmark TR23KC specification

Turn filter clockwise until rubber seal contacts the filter adapter, and then tighten the filter an additional 2/3 to 3/4 turn. Use only Exmark (Part No. 1-513211) or Eaton (Part No. 103144) filter elements.

d) Start engine and run several minutes.

g)Check hydraulic oil level as outlined in 6.1.10.

6.1.20.2Change hydraulic oil:

Service Interval: Yearly

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Carefully clean area around small fitting under oil reservoir. Loosen clamp, remove hose, and allow oil to drain from reservoir. It is important that no dirt or contamination enters the hydraulic system. Reinstall hose and tighten clamp.

c)Clean around reservoir cap and Refill reservoir to center of sight gauge with Mobil 1 15W-50.

d)Start engine and run several minutes.

e)Recheck hydraulic oil level as outlined in 6.1.10. Do not attempt to drain all oil in hydraulic system (except what drains out of the filter or reservoir when changing filter or hydraulic oil); unless it is felt that the oil has been contaminated or becomes extremely hot. Changing oil unnecessarily, could damage the hydraulic system by introducing contaminates into the system.

6.1.21Inspect Electric clutch gap: Service Interval: 250 hrs.

Refer to Section 6.2.12 for inspection and adjustment procedures.

6.1.22Refer to the Engine Owner’s Manual for detailed maintenance required for servicing the engine.

6.1.23Wheel hub, slotted nut torque specification.

a)Tighten the slotted nut on the transaxle tapered shaft and torque to 100 ft. lbs.

b)After proper torque has been applied, turn the nut until the next set of slots lines up with the cross hole in the shaft.

c)Replace cotter pin.

NOTE: Do not use anti-seize compound on the wheel hub.

6.1.24Thread locking adhesives such as "Loctite 242" or "Fel-Pro Pro-Lock, Nut-Type" are used on the following fasteners:

a)Bolt which mounts blade drive clutch to engine crankshaft.

b)Transaxle drive shaft pillow block bearing setscrews.

c)Bolts which attach transaxle to lower stabilizer bracket.

d)Caster wheel spacer nuts (Reference Section 6.1.15).

e)Cutter housing spindle nut.

6.1.25An anti-seize compound on the following locations:

a)Between the pillow block bearings and the transaxle shafts.

6.1.26Mobil HTS grease (or food-grade antisieze) is used in the following locations:

a)Between the cutter housing spindle and bearings.

b)Between the cutter housing spindle and sheave.

c)Under top cutter housing bearing guard.

6.1.27Dielectric grease is used on all blade type electrical connections to prevent corrosion and loss of contact.

-27 -

TR23KC specifications

The Exmark TR23KC is a stand-on mower that has gained attention in the landscaping industry for its superior performance and innovative features. Designed for both commercial and residential landscaping professionals, this model combines power, precision, and comfort in a versatile package that is ideal for a range of mowing applications.

One of the standout features of the TR23KC is its robust engine. Powered by a reliable Kawasaki engine, the mower delivers exceptional cutting performance, making it suitable for tackling tough grass and uneven terrain. The engine ensures optimal fuel efficiency while providing enough power to handle demanding mowing tasks. This reliability allows landscapers to complete jobs quickly without sacrificing quality.

The cutting deck is another remarkable feature of the TR23KC. With a cutting width of 48 inches, it allows for efficient mowing over large areas. The deck is fabricated from high-quality materials, offering durability and resistance to wear and tear. The mower has adjustable cutting heights, enabling users to achieve the desired grass length, which is particularly beneficial for maintaining varying lawn conditions throughout the seasons.

In terms of comfort, the Exmark TR23KC includes an ergonomic stand-on platform. This design not only provides ease of use but also enhances operator visibility, offering an unobstructed view of the cutting area. The platform is equipped with anti-vibration features, reducing fatigue during long working hours, while the intuitive controls facilitate ease of use.

One notable technology integrated into the TR23KC is Exmark's innovative wheel technology. The large drive wheels enhance maneuverability and traction, allowing the operator to navigate around obstacles with utmost precision. The zero-turn capability further enhances its agility, making it simple to turn around tight corners and narrow spaces without needing to reposition.

Safety is also prioritized in the design of the TR23KC. It features an automatic engine shut-off system that activates when the operator leaves the platform. This ensures that the mower remains safe to use and reduces the risk of accidents.

Overall, the Exmark TR23KC stand-on mower is an excellent choice for professionals seeking a machine that combines power, efficiency, and comfort. Its robust engine, durable cutting deck, ergonomic design, and advanced technologies make it a reliable option for tackling various mowing tasks, establishing it as a leader in the stand-on mower segment.