Throttle Tension, Armrest Adjustment

6.2.13Steering Chain Adjustment

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Position the steering handle bar so that it points the unit straight forward (the rear steering wheel should be in line with the rider main frame channel).

c)Check to see if the chains are loose.

d)To take up slack in the chains, loosen the rear jam nuts connecting the eyebolts to cross link bars, then equally tighten each forward jam nut until slack is taken up. Retighten the forward jam nuts onto the links.

e)If the unit tends to turn left when handle bar is positioned for straight forward travel, adjust by shortening the right hand link (threading jam nuts closer to “eye” end of the eyebolt) and lengthening the left hand link (threading jam nuts away from the “eye” end of the eyebolt) an equal amount. Re check chain tension.

f)If the unit tends to turn right when handle bar is positioned for straight forward travel, reverse procedure as stated in paragraph “d” above.

6.2.14Throttle Control Adjustment

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Loosen the cable clamp on the engine and position the throttle control at the control console within 1/4” (6mm) from the upper end of the slot. Pull on cable assembly at lower end, where it attached to the engine, until the throttle control arm contacts the stop screw. Secure cable with cable clamp.

6.2.15Throttle Cable Tension

a)Stop engine, wait for all moving parts to stop, and remove key.

b)Tension in throttle lever can be adjusted by adjusting the tightness of the lever pivot bolt, which is located under the console. See Figure 17.

FIGURE 17

THROTTLE TENSION

6.2.16Seat armrest adjustment.

a)Lift armrest on seat. Locate square tab marked with the numbers 1 through 4. Rotate square tab 1/4 turn to raise or lower the armrest in approximately 1/4” increments. See Figure 18.

Armrest Adjustment Tab Rotate ¼ Turn

FIGURE 18

ARMREST ADJUSTMENT

- 34 -

TR23KC specifications

The Exmark TR23KC is a stand-on mower that has gained attention in the landscaping industry for its superior performance and innovative features. Designed for both commercial and residential landscaping professionals, this model combines power, precision, and comfort in a versatile package that is ideal for a range of mowing applications.

One of the standout features of the TR23KC is its robust engine. Powered by a reliable Kawasaki engine, the mower delivers exceptional cutting performance, making it suitable for tackling tough grass and uneven terrain. The engine ensures optimal fuel efficiency while providing enough power to handle demanding mowing tasks. This reliability allows landscapers to complete jobs quickly without sacrificing quality.

The cutting deck is another remarkable feature of the TR23KC. With a cutting width of 48 inches, it allows for efficient mowing over large areas. The deck is fabricated from high-quality materials, offering durability and resistance to wear and tear. The mower has adjustable cutting heights, enabling users to achieve the desired grass length, which is particularly beneficial for maintaining varying lawn conditions throughout the seasons.

In terms of comfort, the Exmark TR23KC includes an ergonomic stand-on platform. This design not only provides ease of use but also enhances operator visibility, offering an unobstructed view of the cutting area. The platform is equipped with anti-vibration features, reducing fatigue during long working hours, while the intuitive controls facilitate ease of use.

One notable technology integrated into the TR23KC is Exmark's innovative wheel technology. The large drive wheels enhance maneuverability and traction, allowing the operator to navigate around obstacles with utmost precision. The zero-turn capability further enhances its agility, making it simple to turn around tight corners and narrow spaces without needing to reposition.

Safety is also prioritized in the design of the TR23KC. It features an automatic engine shut-off system that activates when the operator leaves the platform. This ensures that the mower remains safe to use and reduces the risk of accidents.

Overall, the Exmark TR23KC stand-on mower is an excellent choice for professionals seeking a machine that combines power, efficiency, and comfort. Its robust engine, durable cutting deck, ergonomic design, and advanced technologies make it a reliable option for tackling various mowing tasks, establishing it as a leader in the stand-on mower segment.