Exmark TR23KC manual For Serial Nos ,000 539,999, Blade Bolt Installation

Page 26

e)Clean out any grass build-up from underside of deck and in discharge chute.

6.1.5Check mower blades.

Service Interval: Daily

a)Disengage PTO.

b)Raise deck using lift actuator.

c)Stop engine, wait for all moving parts to stop, and remove key.

d)Lift deck and secure in raised position as stated in Section 6.1.4.

e)Inspect blades and sharpen or replace as required.

For Serial Nos. 510,000 – 539,999:

d)Re-install the blades (if they were removed) by placing a block of wood between the front or rear baffles and the blade then torquing the blade bolts to 115-120 ft. lbs. (156-163 N-m). Be sure the spring disk washer cone is installed toward the bolt head. See Figure 5.

CAUTION

POTENTIAL HAZARD

♦Operating a mower deck with loose or weakened blade bolts can be dangerous.

WHAT CAN HAPPEN

♦A loose or weakened blade bolt could allow a blade rotating at a high speed to come out from under the deck, causing serious injury or property damage.

HOW TO AVOID THE HAZARD

♦Replace the blade bolt after striking a foreign object. (Use only Exmark replacement parts PN 103-0862 – blade bolt and PN 103-0865 – spring disc washer).

♦DO NOT lubricate the threads of the bolt or spindle before assembly.

♦Torque the blade bolt to 115-120 ft. lbs. (156-163 N-m)

DO NOT USE WRENCH HERE.

FOR BLADE INSTALLATION MAINTAIN 140-145 ft-lbs. (190-197 N-m) ON THIS NUT

FIGURE 5

BLADE BOLT INSTALLATION

For Serial Nos. 540,000 and Higher:

d)Re-install the blades (if they were removed) in the following order (See Figure 6):

1)Install bushing through blade with bushing flange on bottom (grass) side of blade.

2)Install bushing/blade combo into spindle.

-21 -

Page 25 Page 27
Image 26
Page 25 Page 27
Contents For Turf Ranger Serial Nos ,000 & Higher FMD524 & FMD604 Potential Hazard Exmark Parts PLUS→ Program Operators Manual Table of Contents Your Safety is Involved SafetySafety Alert Symbol TrainingCarbon monoxide can kill you Potential Hazard Operation Safe Zone for Mowing Page Maintenance and Storage Safety Signs Page Specifications Mower Deck DimensionsTires Torque RequirementsAssembly Instructions Service BatteryInstall Drive Wheels Install SeatInstall Rear Steering Wheel Install Handle BARHardware and Support PIN Location for Deck Support Frame Position Discharge Chute ControlsIdler Pulley KIT and Location Page Mowing Operation InstructionsPRE-START Drive Wheel Release LeverTransporting Maintenance & Adjustments Periodic MaintenanceService Interval Daily Blade Bolt Installation For Serial Nos ,000 539,999Blade Bolt Installation Page Page Caster Wheel Assembly Lubrication ChartFitting Locations Initial Service Pumps Places Page Page Adjustments Cutting Height AdjustmentANTI-SCALP Roller Installation Cutting Height Adjustment Potential Hazard Brake Control Link and Spring Adjustment Neutral Centering Device AdjustmentParking Brake Quadrant Adjustment Parking Brake Neutral Lockout Adjustment Electric Clutch Adjustment Motion Control Linkage AdjustmentSeat Switch Adjustment Armrest Adjustment Throttle TensionTrouble Shooting Waste DisposalProblem Engine TroubleshootingEngine Troubleshooting Table Wiring Diagrams Year Limited Warranty Exmark Turf Equipment Page Page Service Record Page See EXMARK’S Complete Line of Accessories

TR23KC specifications

The Exmark TR23KC is a stand-on mower that has gained attention in the landscaping industry for its superior performance and innovative features. Designed for both commercial and residential landscaping professionals, this model combines power, precision, and comfort in a versatile package that is ideal for a range of mowing applications.

One of the standout features of the TR23KC is its robust engine. Powered by a reliable Kawasaki engine, the mower delivers exceptional cutting performance, making it suitable for tackling tough grass and uneven terrain. The engine ensures optimal fuel efficiency while providing enough power to handle demanding mowing tasks. This reliability allows landscapers to complete jobs quickly without sacrificing quality.

The cutting deck is another remarkable feature of the TR23KC. With a cutting width of 48 inches, it allows for efficient mowing over large areas. The deck is fabricated from high-quality materials, offering durability and resistance to wear and tear. The mower has adjustable cutting heights, enabling users to achieve the desired grass length, which is particularly beneficial for maintaining varying lawn conditions throughout the seasons.

In terms of comfort, the Exmark TR23KC includes an ergonomic stand-on platform. This design not only provides ease of use but also enhances operator visibility, offering an unobstructed view of the cutting area. The platform is equipped with anti-vibration features, reducing fatigue during long working hours, while the intuitive controls facilitate ease of use.

One notable technology integrated into the TR23KC is Exmark's innovative wheel technology. The large drive wheels enhance maneuverability and traction, allowing the operator to navigate around obstacles with utmost precision. The zero-turn capability further enhances its agility, making it simple to turn around tight corners and narrow spaces without needing to reposition.

Safety is also prioritized in the design of the TR23KC. It features an automatic engine shut-off system that activates when the operator leaves the platform. This ensures that the mower remains safe to use and reduces the risk of accidents.

Overall, the Exmark TR23KC stand-on mower is an excellent choice for professionals seeking a machine that combines power, efficiency, and comfort. Its robust engine, durable cutting deck, ergonomic design, and advanced technologies make it a reliable option for tackling various mowing tasks, establishing it as a leader in the stand-on mower segment.
Top Page Image Contents