![](/images/new-backgrounds/1102367/10236769x1.webp)
Maintenance
| Figure 23 |
1. Engaged | 2. Partially engaged — Do |
| Not operate with ROPS |
| in this condition. |
|
|
Check Seat Belt
Service Interval: Before each use or daily
Visually inspect seat belt for wear, cuts, and proper operation of retractor and buckle. Replace before operating if damaged.
Engine Owner's Manual for additional information.)
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.See the Engine Owner's Manual for maintenance instructions.
Check Air Filter Assembly (if equipped)
Service Interval: As required
Important: To prevent engine damage, always operate the engine with both air filters and cover installed.
1.When checking or replacing the air filter element, make sure the air filter assembly is installed in the brackets.
2.Position the air cleaner cover so that the breather valve does not interfere with the throttle mechanism.
Check for Loose Hardware
Service Interval: Before each use or daily
1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.
2.Visually inspect machine for any loose hardware or any other possible problem. Tighten hardware or correct the problem before operating.
Service Air Cleaner
Service Interval: Every 250
Every 500
Figure 24
1. Air cleaner cover | 3. Breather valve |
2.Throttle mechanism
3.Secure the cover with latches.
Change Engine Oil
Service Interval: After the first 5 hours
Every 100 hours/Yearly (whichever comes first)
35