Recommended Jump Starting Procedure | Exmark 000 & higher, 312

Exmark 000 & higher, 312 manual Recommended Jump Starting Procedure

Maintenance

Voltage	Percent	Maximum	Charging
Reading	Charge	Charger	Interval
		Settings
12.0–12.2	25–50%	14.4 volts/4	2 Hours
		amps
11.7–12.0	0–25%	14.4 volts/4	3 Hours
		amps
11.7 or less	0%	14.4 volts/2	6 Hours or
		amps	More

Important: For Kohler EFI units: Unplug the harness from the ECU before performing any welding on the equipment.

CAUTION

Connecting the jumper cables incorrectly (wrong polarity) can immediately damage the electrical and/or EFI system.

Be certain of battery terminal polarity and jumper cable polarity when hooking up batteries.

Note: The following instructions are adapted from the SAE J1494 Rev. Dec. 2001 – Battery Booster Cables – Surface Vehicle Recommended Practice (SAE – Society of Automotive Engineers).

Recommended Jump			WARNING
Starting Procedure			Batteries contain acid and produce explosive
Service Interval: As required			gases.
			• Shield the eyes and face from the batteries
1. Check the weak battery for terminal corrosion
			at all times.
	(white, green, or blue “snow”), it must be cleaned		• Do Not lean over the batteries.
	off prior to jump starting. Clean and tighten
	connections as necessary.		Note: Be sure the vent caps are tight and level.

	CAUTION		Place a damp cloth, if available, over any vent
			caps on both batteries. Be sure the vehicles do
	Corrosion or loose connections can cause
			not touch and that both electrical systems are
	unwanted electrical voltage spikes at anytime		off and at the same rated system voltage. These
	during the jump starting procedure.		instructions are for negative ground systems only.
	Do Not attempt to jump start with loose or	3. Connect the positive (+) cable to the positive (+)
	corroded battery terminals or damage to the		terminal of the discharged battery that is wired to
	engine or EFI may occur.		the starter or solenoid as shown in Figure 19.

	DANGER
	Jump starting a weak battery that is cracked,
	frozen, has low electrolyte level, or an
	open/shorted battery cell, can cause an
	explosion resulting in serious personal injury.
	Do Not jump start a weak battery if these
	conditions exist.

2.Make sure the booster is a good and fully charged lead acid battery at 12.6 volts or greater. Use properly sized jumper cables (4 to 6 AWG) with short lengths to reduce voltage drop between systems. Make sure the cables are color coded or labeled for the correct polarity.

0, 312, 000 & higher specifications

Exmark has long been synonymous with excellence in the world of lawn care and landscaping, and their 000 & higher, 0,312 series is no exception. Engineered for both professional landscapers and passionate homeowners, this series brings together innovative technology with robust design to deliver unparalleled performance and durability.

One standout feature of this series is its powerful engine options, which ensure efficient cutting and grass handling capabilities. The engines are designed to provide consistent power and reliability, even in tough conditions. This reliability is complemented by high-quality cutting decks that deliver precision cuts and exceptional mulching abilities, ensuring that your lawn stays healthy and vibrant.

The cutting height adjustment system allows users to easily modify the height to suit various types of grass and landscaping needs. This adaptability ensures that your grass is always maintained at the optimal length for health and aesthetics. The ergonomic design of the handles incorporates comfort grips, reducing fatigue during prolonged use while providing excellent control over the machine.

Another significant aspect of the 000 & higher, 0,312 series is its advanced technology integration. Many models in this series come equipped with efficient fuel systems that enhance performance while minimizing fuel consumption. Furthermore, the inclusion of intelligent controls and monitoring systems enables users to make informed adjustments, ensuring that the equipment operates at peak performance.

The robust construction of the chassis and frame means that these machines can withstand the rigors of everyday use in various landscapes. The high-quality materials used in the manufacturing process enhance the longevity of the equipment, making it a worthy investment for those serious about maintaining their lawns.

In addition, Exmark places a strong emphasis on safety features. The series includes protective shields and easy-to-access controls that prioritize user safety without compromising on functionality. Maintenance is made simple through user-friendly designs, allowing for quick access to essential components.

In conclusion, the Exmark 000 & higher, 0,312 series presents a perfect blend of power, innovation, and user-focused features. With its reliable performance, flexible adjustment options, and sturdy design, this series continues to set the standard for excellence in lawn care equipment. Whether you’re a professional or a homeowner, the Exmark 000 & higher, 0,312 series stands ready to meet all your landscaping needs.