Husqvarna LE389 manual How To Assemble The Handle, Lower Handle

How To Assemble The Handle

For ease of assembly, attach the lower handle before mounting the wheels.

1Mount the lower handle (A) to the inside of the edger frame (B). Fasten the lower handle with the fasteners (C, D) shown in Figure 3. As you tighten the fasteners, pull back on the lower handle.

2Attach the right rear wheel (E) to the wheel support rod (F) with the fasteners (G, H) shown in Figure 4.

3Attach the left rear wheel (J) and the short spacer

(K) to the edger frame with the fasteners (L, M) shown in Figure 5.

4Attach the front wheels (N) and long spacers (O) to the front wheel arm (P) with the fasteners (Q, R, S) shown in Figure 6.

A

C Bolt	D	Locknut	B
5/16−18x5/8
	5/16−18

Figure 3: Lower Handle

F

HWasher 1/2x3/4

GE

Figure 4: Right Rear Wheel

J	L Shoulder Bolt
	3/8−16x1.40

K

MLocknut 3/8−16

Figure 5: Left Rear Wheel

Assembly

R Washer

11/32x11/16

				S Wide Flange
R Washer				Hex Nut
				5/16−18
11/32x11/16
Q Bolt
5/16−18x4-1/2			O	N
		P
	O	R Washer
N		11/32x11/16

Figure 6: Front Wheels

GB 9