Husqvarna LE389 manual Troubleshooting

Page 31

Troubleshooting

	PROBLEM	CAUSE	CORRECTION
	Engine difficult to start	Stale fuel	Drain fuel tank. Fill with fresh fuel.
	or
	or	Dirt in fuel tank or out of fuel	Drain and clean fuel tank. Fill with fresh
		Dirt in fuel tank or out of fuel	Drain and clean fuel tank. Fill with fresh
	Engine runs erratically		fuel.
	Engine runs erratically	Carburetor out of adjustment	Contact an Authorized Husqvarna
	or	Carburetor out of adjustment	Contact an Authorized Husqvarna
	Engine will not run at full speed		service dealer.

		Fouled spark plug	Clean and set spark plug gap.
		Fouled spark plug	Clean and set spark plug gap.
		Dirty air filter	Clean or replace air filter.
	Engine smokes excessively	Dirty air filter	Clean or replace air filter.
	Cutting blade will not rotate	Debris interferes with blade	Clean debris from blade.

		Loose blade	Tighten blade nut.
		Damaged V−belt	Replace V−belt.
	Blade will not cut properly	Damaged quill bearings	Replace the quill assembly. Contact an
			Authorized Husqvarna service dealer.
		Damage or worn blade	Replace the blade.
	Excessive vibration	Loose parts	Stop engine immediately. Tighten all
			fasteners. If vibration continues,
			contact an Authorized Husqvarna
			service dealer.

Trouble shooting

Need Assistance?

Go to www.usa.husqvarna.com or call 1−800−HUSKY62

GB

29

Image 31

Contents MS-3616MA Operator’s Manual − Model LE389Serial number Engine model Date of purchase Product model numberTable of Contents Symbols And Warnings SafetyWhen Transporting Equipment When Adding FuelWhen Starting Engine When Operating EquipmentWhen testing for spark Before performing adjustments or repairsSafe Storage Operator Safety Rules Before UseFuel Safety Operating SafetyRepair / Adjustments Safety Parts Packed Separately In Carton Assembly− Wheels − Hardware Parts Bag Product Completely Assembled Removal From The CartonLower Handle How To Assemble The HandleHandle Assembly Assembly ChecklistFeatures Before Starting The Engine OperationEye Protection Type of gasoline to use Gasoline RequirementsEngine Controls How To Start The EngineRecoil Start Normal Stopping How To StopHow To Use The Throttle Control Emergency StoppingThrown debris can cause severe laceration How To Use The Clutch/Depth Control LeverFront Wheel Knob How To Use The Index LeverOperation Of Edger How To Operate The EdgerCurb-Hopping Feature Curb-hop featureEdging Tips Maintenance Chart MaintenanceBelt Removal How To Remove The BeltBlade Removal How To Replace The BladeSpark Plug Engine MaintenanceCarburetor Adjustment Emission ControlChange Oil How To Change The OilChange Air Filter How To Service The Air FilterEdger StorageTroubleshooting Page Power Ratings Product SpecificationsWarranty Statement Items not Covered by this Warranty Owner’s Warranty Responsibilities Emissions Control System Warranty StatementModerate Key Description Engine Mount AssemblyWheel Assembly Model LE389 CURB-HOP Assembly Edger Blade Assembly Blade Guard Assembly Clutch / Drive Lever Assembly Handle Assembly Decals