Husqvarna LE389 manual How To Remove The Belt, Belt Removal

Page 25

How To Remove The Belt

The belt (A) is made of a special compound. If the belt becomes worn or breaks, replace the belt with an original equipment belt.

1Disconnect the spark plug wire from the spark plug.

2Pull the clutch / depth control lever (B) back to release the tension from the belt (see Figure 22).

B

Figure 22: Clutch / Depth Control Lever

3Remove the two screws (C) and spacers (D) from the top of the engine pulley cover (E). Remove the engine pulley cover (see Figure 23).

4Loosen, do not remove, the screw (F) that holds the belt guide (G). Then, move the belt guide away from the belt.

5Remove the two screws (H) from the belt guard (J) (see Figure 24).

6Remove the old belt from the engine pulley (K) and from the quill assembly pulley (L). Replace with an original equipment belt.

7To install a new belt, reverse the above steps.

DD

K

G

AF

E

C

Figure 23: Belt Removal

H

J L

H

Figure 24: Belt Guard

Maintenance

GB

23

Image 25

Contents MS-3616MA Operator’s Manual − Model LE389Serial number Engine model Date of purchase Product model numberTable of Contents Symbols And Warnings SafetyWhen Starting Engine When Adding FuelWhen Operating Equipment When Transporting EquipmentWhen testing for spark Before performing adjustments or repairsFuel Safety Operator Safety Rules Before UseOperating Safety Safe StorageRepair / Adjustments Safety Parts Packed Separately In Carton Assembly− Wheels − Hardware Parts Bag Product Completely Assembled Removal From The CartonLower Handle How To Assemble The HandleHandle Assembly Assembly ChecklistFeatures Before Starting The Engine OperationEye Protection Type of gasoline to use Gasoline RequirementsEngine Controls How To Start The EngineRecoil Start How To Use The Throttle Control How To StopEmergency Stopping Normal StoppingThrown debris can cause severe laceration How To Use The Clutch/Depth Control LeverFront Wheel Knob How To Use The Index LeverOperation Of Edger How To Operate The EdgerCurb-Hopping Feature Curb-hop featureEdging Tips Maintenance Chart MaintenanceBelt Removal How To Remove The BeltBlade Removal How To Replace The BladeCarburetor Adjustment Engine MaintenanceEmission Control Spark PlugChange Oil How To Change The OilChange Air Filter How To Service The Air FilterEdger StorageTroubleshooting Page Power Ratings Product SpecificationsWarranty Statement Items not Covered by this Warranty Owner’s Warranty Responsibilities Emissions Control System Warranty StatementModerate Key Description Engine Mount AssemblyWheel Assembly Model LE389 CURB-HOP Assembly Edger Blade Assembly Blade Guard Assembly Clutch / Drive Lever Assembly Handle Assembly Decals