Chapter 2 Getting Started 11
Starting and Stopping the SunPCi III
Software
This section provides instructions for starting and stopping the SunPCi software.

▼How to Start the SunPCi III Software

●Tostart the SunPCi software, open a terminal window and type the following
command at the Solaris prompt:
When you start the SunPCi III software for the first time, the software createsa
Solaris directory named ~/pc, into which several SunPCi III files are installed.
Youthen see a SunPCi splash screen and the SunPCi window opens.
Note – If you modify the $path statement in your .login file, you can create a
shortcut to open SunPCi. For information about customizing the SunPCi path, refer
to your Solaris software documentation.

▼How to Exit the SunPCi III Software

Stopping the SunPCi software involves two steps: closing Microsoft Windowsor
Linux and then closing the SunPCi software.
Caution – Always close Microsoft Windowsor Linux before exiting from SunPCi
software or your files and applications could become corrupted.
See “SunPCi III Menus” on page113 for descriptions of menu options that are
available.
%/opt/SUNWspci3/bin/sunpci