60 SunPCi III 3.2.1 User’s Guide •March 2004
4. Double-click upgrade.bat.
The upgrade process continues. This program automatically maps a network drive
for its own use. If you do not have a network drive letter available in Windows
Explorer,the process fails.
5. Follow the prompts on the window and enter the information that Microsoft
Windows requests.
Forexample, enter the CD key on the back of your CD case and your administrator ’s
password when prompted.
When you are finished entering all the information, the SunPCi III software reboots
into Windows2000 Professional.
Tip – This step can take several minutes to complete.
6. Install the Service Pack.
Tocomplete the process, you need to install the appropriate Service Pack. See
“Microsoft WindowsService Packs” on page 20.
Upgrading Windows NT4 Server or WindowsNT4 TS to Windows 2000 Server
Caution – The setup and configuration procedures for the SunPCi III program
involve some steps that differ from the Microsoft upgrade steps. Do not use the
standard Microsoftupgrade procedure provided on the Windows 2000 Server CD or
the installation will fail and your emulated C: drive can become corrupted.
Caution – Before upgrading to Windows2000 Server, you must update your Intel
drivers. Refer to “Updating Intel and Linux Drivers” on page 115for additional
information.
Before You Begin the Upgrade
Before starting to upgrade WindowsNT4 Server or Windows NT4 TS to Windows
2000 Server, follow these steps: