1.Log off all clients and other processes from the server before upgrading Microsoft Windows and before enabling SunFSD mapping in Microsoft Windows.
Enabling SunFSD mapping enables it for all current users, creating a potential breach in security, so caution must be employed.
2.Double-click the fsdon.reg Registry file located at:
C:\sun\sunfsd\fsdon.reg
Caution – This enables SunFSD. Leave SunFSD enabled until after the upgrade to Windows 2000 Server and then disable.
▼How to Upgrade Windows NT4 Server or Windows NT4 TS to Windows 2000 Server
Caution – The setup and configuration procedures for the SunPCi III program involve some steps that differ from the Microsoft upgrade steps. Do not use the standard Microsoft upgrade procedure provided on the Windows 2000 Server CD or the installation will fail, your Windows 2000 Server emulated disk will not run with SunPCi III, and your emulated C: drive can become corrupted.
1.Insert the Windows 2000 Server CD into your system’s
2.Click Start, and choose Programs and Windows Explorer. The Windows Explorer window opens.
3.Using the Windows Explorer window, find the following path:
C:\sun\w2kupg\upgrade.bat
Note – If you cannot find this directory on your C: drive, either you have installed the wrong version of the SunPCi III software, or you did not update your SunPCi III drivers.
Chapter 6 Using Windows 2000 Professional or Windows 2000 Server 61
