14.From the File menu, select Reset PC.
15.Create a file system for the emulated drive as follows:
■To create a FAT file system on the drive, type the following at the C:\> prompt and press Return:
f:\drivers\winxp\setupwxp /td
■To create an NTFS file system for the emulated drive, type the following at the C:\> prompt and press Return:
f:\drivers\winxp\setupwxp /td /NTFS:max
When the system finishes copying the files, SunPCi III software restarts.
16.When the Windows XP Professional operating system asks where to install Windows, install the software to the C: drive.
The installation routine continues. Follow the steps displayed on the screen. After you finish the installation, you can detach the D: drive, delete the emulated drive file, and remove it from your SunPC.ini file.
Configuring Virtual Ethernet
Networking for Windows XP
Professional
The SunPCi III software comes with physical Ethernet networking enabled by default. If you prefer to use virtual networking, you need to disable the physical Ethernet adapter in Microsoft Windows and install the virtual Ethernet adapter.
Note – When more than one SunPCi III card is installed in a system, virtual networking is disabled by the SunPCi III software.
Caution – Do not enable both virtual and physical networking at the same time, since unpredictable results and operations can happen.
