Attaching Emulated Drives
If you want to use an existing emulated drive that is not currently attached to your SunPCi card as a C: or D: drive, you can attach it by following the directions in this section.
▼How to Attach an Existing Emulated Drive as a C: or D: Drive
Note – If the drive you want to use is already attached, skip this procedure.
If you want to use an emulated drive that is not attached as a C: or D: drive, you need to attach the drive.
To attach an existing emulated drive, perform the following procedure:
1.Start the SunPCi III software.
2.From the Options menu, choose Attach an Existing Emulated Drive. The Attach an Existing Emulated Drive dialog box opens.
FIGURE 2-2 Attach an Existing Emulated Drive Dialog Box
3.Click the C: or D: radio button to specify how to attach the drive.
4.In the “Choose a file to attach”
You can click Browse to search for an emulated drive.
Chapter 2 Getting Started 17
