Sun Microsystems 817-3630-11 manual Sunpci Command and Its Options

The sunpci Command and Its Options

To use a command-line option with the sunpci command, type the command, followed by a dash, followed by the command-line option, followed by any required argument such as a file name, card name, or command.

For example:

%/opt/SUNWspci3/bin/sunpci -option argument

Use option to specify the command-line option you want to use. Use argument to specify the name of the file you want to use with the option. Not all options can accept file names. Note that there is no space between the dash and the option.

For example, to start SunPCi III software and place customized text in the window’s title bar, type the following:

%/opt/SUNWspci3/bin/sunpci -title Text string

To start the SunPCi III software with a C: drive other than your default C: drive,

type this command and substitute the name of the new C: drive file for C.newdrive:

% /opt/SUNWspci3/bin/sunpci -C C.newdrive

110 SunPCi III 3.2.1 User’s Guide • March 2004