Husqvarna LE389 manual Repair / Adjustments Safety

Page 8

Safety

Repair / Adjustments Safety

•After striking a foreign object, stop the engine. Remove the wire from the spark plug, and keep the wire away from the plug to prevent accidental starting. Thoroughly inspect the Edger for any damage, and repair the damage before restarting and operating.

•If Edger should start to vibrate abnormally, stop engine and check immediately for the cause.

Vibration is generally a warning of trouble.

•Stop the engine whenever you leave the operating position. Also, disconnect the spark plug wire before unclogging the blade and when making any repairs, adjustments, or inspections.

•When cleaning, repairing, or inspecting, shut off the engine and make certain all moving parts have stopped.

•Never attempt to make any adjustments while the engine is running.

6	www.usa.husqvarna.com

Image 8

Contents Operator’s Manual − Model LE389 MS-3616MADate of purchase Product model number Serial number Engine modelTable of Contents Safety Symbols And WarningsWhen Adding Fuel When Starting EngineWhen Operating Equipment When Transporting EquipmentBefore performing adjustments or repairs When testing for sparkOperator Safety Rules Before Use Fuel SafetyOperating Safety Safe StorageRepair / Adjustments Safety − Wheels − Hardware Parts Bag AssemblyParts Packed Separately In Carton Removal From The Carton Product Completely AssembledHow To Assemble The Handle Lower HandleAssembly Checklist Handle AssemblyFeatures Eye Protection OperationBefore Starting The Engine Gasoline Requirements Type of gasoline to useHow To Start The Engine Engine ControlsRecoil Start How To Stop How To Use The Throttle ControlEmergency Stopping Normal StoppingHow To Use The Clutch/Depth Control Lever Thrown debris can cause severe lacerationHow To Use The Index Lever Front Wheel KnobHow To Operate The Edger Operation Of EdgerCurb-hop feature Curb-Hopping FeatureEdging Tips Maintenance Maintenance ChartHow To Remove The Belt Belt RemovalHow To Replace The Blade Blade RemovalEngine Maintenance Carburetor AdjustmentEmission Control Spark PlugHow To Change The Oil Change OilHow To Service The Air Filter Change Air FilterStorage EdgerTroubleshooting Page Product Specifications Power RatingsWarranty Statement Items not Covered by this Warranty Emissions Control System Warranty Statement Owner’s Warranty ResponsibilitiesModerate Engine Mount Assembly Key DescriptionWheel Assembly Model LE389 CURB-HOP Assembly Edger Blade Assembly Blade Guard Assembly Clutch / Drive Lever Assembly Handle Assembly Decals