Maintenance
Maintenance
Maintenance Chart
|
| Before | First | Every | Every | Every | Before |
|
| PROCEDURE | Each | 5 to 8 | 25 | 50 | 100 |
| |
| Storage |
| ||||||
|
| Use | Hours | Hours | Hours | Hours |
| |
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
E | Lubricate All Pivot Points |
|
| √ |
|
| √ |
|
D | Lubricate Wheel Axles |
|
| √ |
|
| √ |
|
G |
|
|
|
|
|
|
|
|
Drive Belt, Check | √ |
|
|
|
| √ |
| |
E | Tighten All Fasteners | √ |
|
|
|
| √ |
|
R | Check Blade for Wear or Damage | √ |
|
|
|
| √ |
|
|
|
|
|
|
|
|
|
|
| Oil, Check | √ |
|
|
|
|
|
|
E |
|
|
|
|
|
|
|
|
Oil, Change *** |
| √ |
| √ |
|
|
| |
N | Cooling System, Clean * |
|
|
| √ |
| √ |
|
G |
|
|
|
|
|
|
|
|
Air Filter, Clean / Replace ** |
|
|
| √ |
| √ |
| |
I |
|
|
|
|
|
|
|
|
Muffler, Check |
|
|
| √ |
|
|
| |
N |
|
|
|
|
|
|
|
|
Spark Plug, Clean / Replace |
|
|
|
| √ | √ |
| |
E |
|
|
|
|
| |||
Inspect Spark Arrester |
|
|
| √ |
|
|
| |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
*In dusty conditions, clean every 25 hours.
**In dusty conditions or when airborne debris is present, clean more often. Replace air cleaner if it is very dirty.
***Change oil after first 5 to 8 hours of use, then every 50 hours. Change oil every 25 hours when operating the engine under heavy load or in high temperatures.
Regular maintenance will improve the performance and extend the life of the equipment. See any Authorized Husqvarna service dealer for service.
Use only original equipment replacement parts. Other parts may not perform as well, may damage the unit, and may result in injury. In addition, use of other parts may void your warranty.
•Check the fasteners. Make sure all fasteners are tight.
•Follow the information in the Maintenance section to keep the unit in good operating condition.
WARNING
Thrown debris can result in foreign objects being thrown into the eyes, which can cause severe eye damage.
•Always wear safety glasses or eye shields while you assemble, operate or do maintenance to the unit.
WARNING |
Unintentional sparking can result in fire or electric shock.
Unintentional
Before performing adjustments or repairs:
•Disconnect the spark plug wire and keep it away from the spark plug.
•Use only correct tools.
•Do not tamper with governor spring, links or other parts to increase engine speed.
When testing for spark:
•Use approved spark plug tester.
•Do not check for spark with spark plug removed.
22 | www.usa.husqvarna.com |