Husqvarna LE389 manual Curb-hop feature, Curb-Hopping Feature

Page 22

Operation

Curb-hop feature

1Stop the engine. Never adjust the wheels while the engine is running.

2Disconnect the spark plug wire from the spark plug.

3Set the entire unit on the curb level. Loosen the front wheel knob (A). See Figure 21.

4Slide the front wheel (B) all the way to the right and tighten the front wheel knob.

5Use the curb height adjust lever (C) to lower the front wheel. Lower the front wheel until the front wheel is level with the left rear wheel.

6Position the unit so that both the right rear wheel

(D) and the front wheel are off to the side of the curb and the left rear wheel is on the curb as shown in Figure 21.

7Loosen the rear wheel knob (E) to lower the right rear wheel to the pavement. Tighten the rear wheel knob.

8Use the curb height adjust lever to lower the front wheel to the setting where the front wheel touches the pavement and the unit is level.

9Connect the spark plug wire to the spark plug.

WARNING

Rotating parts can contact or entangle hands, feet, hair, clothing, or accessories.

Traumatic amputation or severe laceration can result.

•Never adjust the wheels or the blade while the engine is running.

•Before you adjust the wheels or change the blade position, disconnect the spark plug wire and keep it away from the spark plug.

•While the engine is running, never leave the unit unattended.

•Keep bystanders away from machine.

E		A
	D	C
	D
		B

Figure 21: Curb-Hopping Feature

20	www.usa.husqvarna.com

Image 22

Contents Operator’s Manual − Model LE389 MS-3616MADate of purchase Product model number Serial number Engine modelTable of Contents Safety Symbols And WarningsWhen Operating Equipment When Adding FuelWhen Starting Engine When Transporting EquipmentBefore performing adjustments or repairs When testing for sparkOperating Safety Operator Safety Rules Before UseFuel Safety Safe StorageRepair / Adjustments Safety Parts Packed Separately In Carton Assembly− Wheels − Hardware Parts Bag Removal From The Carton Product Completely AssembledHow To Assemble The Handle Lower HandleAssembly Checklist Handle AssemblyFeatures Before Starting The Engine OperationEye Protection Gasoline Requirements Type of gasoline to useHow To Start The Engine Engine ControlsRecoil Start Emergency Stopping How To StopHow To Use The Throttle Control Normal StoppingHow To Use The Clutch/Depth Control Lever Thrown debris can cause severe lacerationHow To Use The Index Lever Front Wheel KnobHow To Operate The Edger Operation Of EdgerCurb-hop feature Curb-Hopping FeatureEdging Tips Maintenance Maintenance ChartHow To Remove The Belt Belt RemovalHow To Replace The Blade Blade RemovalEmission Control Engine MaintenanceCarburetor Adjustment Spark PlugHow To Change The Oil Change OilHow To Service The Air Filter Change Air FilterStorage EdgerTroubleshooting Page Product Specifications Power RatingsWarranty Statement Items not Covered by this Warranty Emissions Control System Warranty Statement Owner’s Warranty ResponsibilitiesModerate Engine Mount Assembly Key DescriptionWheel Assembly Model LE389 CURB-HOP Assembly Edger Blade Assembly Blade Guard Assembly Clutch / Drive Lever Assembly Handle Assembly Decals