Husqvarna 968999250, Z4818BIA manual Assembly

Page 14

ASSEMBLY

TO ROLL THE MOWER OFF OF THE SKID (See Operation section for location and function of controls

•Move to the rear of the mower, and place the IZT (Integraded Zeroturn Transaxle) bypass linkages into the bypass position to disengage the IZT’s (See “TO TRANSPORT” in the Operation section of this manual).

•Sitting on the mower, press the deck lift pedal in to the highest cutting position.

•Release park brake lever.

•Roll the mower forward or backward off of the skid.

TO DRIVE THE MOWER OFF OF THE SKID (See Operation section for location and function of controls)

WARNING

Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure the mower is in a well-ventilated area. Be sure the area in front of the mower is clear of other people and objects.

•Be sure all of the above assembly steps have been completed.

•Check engine oil level and fill fuel tank with gasoline.

•Place the IZT(Integraded Zeroturn Transaxle) bypass linkages into the drive position (See “TRANSPORT” in the Operation section of this manual).

•Sit on the seat in the operating position, set the park brake lever to the on position.

•Rotate the control levers outward into the neutral slot.

•Press forward on the deck lift pedal to raise the deck into the highest cutting position.

•Place the throttle control into the choke position.

•Start the engine. After the engine has started, move the throttle control to the idle position.

•Release the park brake.

•Move the control levers into the operate position.

14

Image 14

Contents Operators Manual Models 968999250 / Z4818BIAGood Service Contents Symbols and Decals General Use Safety InstructionsSafety Instructions Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Machine. Activate the parking brake, turn offSpecifications Customer ResponsibilitiesTo Remove the Mower From Crate AssemblyTools Required For Assembly Unpack CrateAttach Control Levers See Fig Before Removing Mower from the SkidAttach Seat See Fig Assembly Checklist Check the Tire PressureIZT Integraded Zeroturn TransaxleBYPASS Linkages OperationControls Deck Blades HOW to USE Your MowerTo SET Parking Brake See Fig EngineTo Move Forward and Backward See Fig To USE Throttle Control See FigTo USE Choke Control See Fig CZ-7 To Adjust the Deck Cutting Height See Fig To Adjust ANTI-SCALP Rollers See FigureTo Operate Mower To Operate on HillsTo Transport See Fig ADD Gasoline Before Starting the EngineCheck Engine OIL Level To Start Engine See Fig Mowing Tips Maintenance Schedule General Recommendations Before Each USELubrication Chart Tires Operator Presence SystemBlade Care Blade Removal See FigTo Sharpen Blade See Fig Battery BeltsEngine LubricationAIR Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas Engine OIL FilterCleaning IN-LINE Fuel Filter See FigsTo Level Deck Service and AdjustmentMower FRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck Belt To Adjust the Seat See Fig To Replace IZT Integraded Zeroturn Transaxle Belt See FigTo Adjust Control Levers See Fig To Remove Wheels for RepairTo Start AN Engine with a Weak Battery To Attach Jumper CablesReplacing Battery See Fig To Adjust Park Brake Tracking AdjustmentBattery StorageFuel System Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Wiring Schematic