Husqvarna 968999250, Z4818BIA To Start AN Engine with a Weak Battery, To Attach Jumper Cables

Page 42

SERVICE AND ADJUSTMENT

TO START AN ENGINE WITH A

WEAK BATTERY

WARNING

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See “BATTERY” in the Customer Responsibilities section of this manual).

If “jumper cables” are used for emergency starting, follow this procedure:

IMPORTANT: YOUR MOWER IS EQUIPPED

WITH A 12-VOLT NEGATIVE GROUNDED

SYSTEM. THE OTHER VEHICLE MUST ALSO

BE A 12-VOLT NEGATIVE GROUNDED

SYSTEM. DO NOT USE YOUR MOWER

BATTERY TO START OTHER VEHICLES.

TO ATTACH JUMPER CABLES

•Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

•Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

•Connect the other end of the BLACK cable to a good CHASSIS GROUND, away from the fuel tank and battery.

TO REMOVE CABLES, REVERSE ORDER

•BLACK cable first from chassis and then from the fully charged battery.

•RED cable last from both batteries.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operators Manual Models 968999250 / Z4818BIAGood Service Contents Symbols and Decals Safety Instructions Safety InstructionsGeneral Use Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Machine. Activate the parking brake, turn offSpecifications Customer ResponsibilitiesTo Remove the Mower From Crate AssemblyTools Required For Assembly Unpack CrateBefore Removing Mower from the Skid Attach Seat See FigAttach Control Levers See Fig Assembly Checklist Check the Tire PressureOperation ControlsIZT Integraded Zeroturn TransaxleBYPASS Linkages Deck Blades HOW to USE Your MowerTo SET Parking Brake See Fig EngineTo USE Throttle Control See Fig To USE Choke Control See FigTo Move Forward and Backward See Fig CZ-7 To Adjust the Deck Cutting Height See Fig To Adjust ANTI-SCALP Rollers See FigureTo Operate Mower To Operate on HillsTo Transport See Fig Before Starting the Engine Check Engine OIL LevelADD Gasoline To Start Engine See Fig Mowing Tips Maintenance Schedule General Recommendations Before Each USELubrication Chart Tires Operator Presence SystemBlade Care Blade Removal See FigTo Sharpen Blade See Fig Battery BeltsEngine LubricationAIR Filter Clean AIR ScreenClean AIR INTAKE/COOLING Areas Engine OIL FilterCleaning IN-LINE Fuel Filter See FigsService and Adjustment MowerTo Level Deck FRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck Belt To Adjust the Seat See Fig To Replace IZT Integraded Zeroturn Transaxle Belt See FigTo Adjust Control Levers See Fig To Remove Wheels for RepairTo Start AN Engine with a Weak Battery To Attach Jumper CablesReplacing Battery See Fig To Adjust Park Brake Tracking AdjustmentBattery StorageFuel System Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Wiring Schematic

968999250, Z4818BIA specifications

The Husqvarna Z4818BIA, model number 968999250, is an advanced zero-turn lawn mower designed for both professional landscapers and enthusiastic homeowners looking for efficiency and control in their lawn maintenance tasks. This model is part of Husqvarna’s renowned line of mowers, known for their reliability, performance, and innovative features.

One of the most notable features of the Z4818BIA is its robust engine. Powered by a commercial-grade Kohler engine, this mower delivers impressive horsepower, enabling it to handle tough mowing conditions with ease. The engine’s reliability ensures that users can depend on consistent performance even during prolonged use.

Equipped with an 18-inch cutting deck, the Z4818BIA provides unmatched maneuverability, allowing users to navigate tight corners and obstacles without sacrificing cut quality. The deck features a three-blade system that produces a clean, even cut, enhancing the overall appearance of the lawn and promoting healthy grass growth.

The Z4818BIA incorporates Husqvarna's patented mowing technology, which optimizes the airflow underneath the deck for superior grass clipping distribution. This feature contributes to a better mulching process and minimizes windrows, ensuring a polished finish with every pass.

The mower's zero-turn capability is another highlight, offering a turning radius of essentially zero degrees. This allows the operator to make sharp turns and efficiently mow around flower beds, trees, and other landscaping features, significantly reducing the time spent mowing.

Comfort is paramount in the design of the Z4818BIA, featuring an ergonomic seat with adjustable armrests to reduce operator fatigue during prolonged use. The user-friendly control panel is intuitively designed, allowing for easy access to all essential functions and adjustable settings.

Safety features also play a significant role in the Z4818BIA's design. The mower includes an automatic blade brake, which stops the blades when the operator lifts off the seat, ensuring maximum safety during operation. Additionally, a reinforced frame enhances durability, allowing it to withstand the rigors of frequent use.

Moreover, the Husqvarna Z4818BIA showcases a strong focus on technology with its easy-start ignition system and maintenance reminders, making upkeep straightforward and hassle-free.

In conclusion, the Husqvarna Z4818BIA, model 968999250, stands out as a versatile, powerful, and user-friendly mower that combines cutting-edge technology with comfort and safety features, making it an excellent choice for those seeking a high-quality zero-turn mower. Its performance, durability, and innovative characteristics ensure that it meets the demanding needs of any lawn care professional or homeowner.
Top Page Image Contents