Husqvarna 968999250, Z4818BIA manual To Adjust the Seat See Fig

Page 40

SERVICE AND ADJUSTMENT

TO REPLACE IZT (Integraded Zeroturn Transaxle) BELT (See Fig. 17)

Park the mower on a level surface. Engage the park brake.

IZT BELT REMOVAL

NOTE: Be careful not to damage the fan blades on the IZT’s as this can affect cooling or damage the IZT’s

• Remove the deck belt (see “TO

REPLACE DECK BELT” in this section

1

3

4

5

of the manual).

• Create slack in the belt by removing the

spring on the pump idler arm.

• The belt should now be able to be

removed from the engine pulley and IZT

pulleys.

BELT INSTALLATION

Wrap the IZT belt around the IZT pulleys

Route the belt around the inside of the idler pulley.

Now you can wrap the belt around the engine pulley.

Reattach the spring on the pump idler arm.

Reinstall the deck belt onto the electric clutch belt (see “TO REPLACE DECK BELT” in this section of the manual).

TO ADJUST THE SEAT (See Fig. 18)

Move the control levers into the neutral position and rotate to the outside of the machine.

Lift up on the back of the seat and rotate it forward.

Loosen the three prong knobs on the bottom of the seat and move the seat to the desired position.

Tighten the three prong knobs and rotate seat back to the operating position.

2

6

CZ-21

FIGURE 17

1.PUMP IDLER ARM SPRING

2.PUMP IDLER

3.ELECTRIC CLUTCH

4.IZT BELT

5.DECK BELT

6.IZT SUPPORT

1

2

3

CZ-1

FIGURE 18

1.SEAT PAN

2.KNOBS

3.WIRE HARNESS

Image 40
Contents Operators Manual Models 968999250 / Z4818BIAGood Service Contents Symbols and Decals Safety Instructions Safety InstructionsGeneral Use Personal protective equipment Driving on Slopes Do as followsChildren 8011-563 Transport Machine. Activate the parking brake, turn offSpecifications Customer ResponsibilitiesAssembly Tools Required For AssemblyTo Remove the Mower From Crate Unpack CrateAttach Seat See Fig Before Removing Mower from the SkidAttach Control Levers See Fig Assembly Checklist Check the Tire PressureControls OperationIZT Integraded Zeroturn TransaxleBYPASS Linkages HOW to USE Your Mower To SET Parking Brake See FigDeck Blades EngineTo USE Choke Control See Fig To USE Throttle Control See FigTo Move Forward and Backward See Fig CZ-7 To Adjust the Deck Cutting Height See Fig To Adjust ANTI-SCALP Rollers See FigureTo Operate Mower To Operate on HillsTo Transport See Fig Check Engine OIL Level Before Starting the EngineADD Gasoline To Start Engine See Fig Mowing Tips Maintenance Schedule General Recommendations Before Each USELubrication Chart Tires Operator Presence SystemBlade Care Blade Removal See FigTo Sharpen Blade See Fig Battery BeltsEngine LubricationClean AIR Screen Clean AIR INTAKE/COOLING AreasAIR Filter Engine OIL FilterCleaning IN-LINE Fuel Filter See FigsMower Service and AdjustmentTo Level Deck FRONT-TO-BACKADJUSTMENTSee Fig To Replace Deck Belt To Adjust the Seat See Fig To Replace IZT Integraded Zeroturn Transaxle Belt See FigTo Adjust Control Levers See Fig To Remove Wheels for RepairTo Start AN Engine with a Weak Battery To Attach Jumper CablesReplacing Battery See Fig To Adjust Park Brake Tracking AdjustmentBattery StorageFuel System Engine OILOther CylindersTroubleshooting Points Problem Cause CorrectionProblemcausecorrection Wiring Schematic

968999250, Z4818BIA specifications

The Husqvarna Z4818BIA, model number 968999250, is an advanced zero-turn lawn mower designed for both professional landscapers and enthusiastic homeowners looking for efficiency and control in their lawn maintenance tasks. This model is part of Husqvarna’s renowned line of mowers, known for their reliability, performance, and innovative features.

One of the most notable features of the Z4818BIA is its robust engine. Powered by a commercial-grade Kohler engine, this mower delivers impressive horsepower, enabling it to handle tough mowing conditions with ease. The engine’s reliability ensures that users can depend on consistent performance even during prolonged use.

Equipped with an 18-inch cutting deck, the Z4818BIA provides unmatched maneuverability, allowing users to navigate tight corners and obstacles without sacrificing cut quality. The deck features a three-blade system that produces a clean, even cut, enhancing the overall appearance of the lawn and promoting healthy grass growth.

The Z4818BIA incorporates Husqvarna's patented mowing technology, which optimizes the airflow underneath the deck for superior grass clipping distribution. This feature contributes to a better mulching process and minimizes windrows, ensuring a polished finish with every pass.

The mower's zero-turn capability is another highlight, offering a turning radius of essentially zero degrees. This allows the operator to make sharp turns and efficiently mow around flower beds, trees, and other landscaping features, significantly reducing the time spent mowing.

Comfort is paramount in the design of the Z4818BIA, featuring an ergonomic seat with adjustable armrests to reduce operator fatigue during prolonged use. The user-friendly control panel is intuitively designed, allowing for easy access to all essential functions and adjustable settings.

Safety features also play a significant role in the Z4818BIA's design. The mower includes an automatic blade brake, which stops the blades when the operator lifts off the seat, ensuring maximum safety during operation. Additionally, a reinforced frame enhances durability, allowing it to withstand the rigors of frequent use.

Moreover, the Husqvarna Z4818BIA showcases a strong focus on technology with its easy-start ignition system and maintenance reminders, making upkeep straightforward and hassle-free.

In conclusion, the Husqvarna Z4818BIA, model 968999250, stands out as a versatile, powerful, and user-friendly mower that combines cutting-edge technology with comfort and safety features, making it an excellent choice for those seeking a high-quality zero-turn mower. Its performance, durability, and innovative characteristics ensure that it meets the demanding needs of any lawn care professional or homeowner.