Husqvarna R 422Ts AWD manual Cutting unit, Lever for hydraulic lift of attachments

Page 13

PRESENTATION

Cutting unit

R 422 Ts AWD can be equipped with two different cutting units. Combi 112 and Combi 122

The Combi-unit, equipped with a BioClip-plug, finely chops the cuttings to fertiliser. Without the BioClip-plug the unit works in the same way as a rear ejection unit.The rear ejector ejects the clippings behind the unit without finely chopping them.

Lever for hydraulic lift of attachments

The lifting lever is used to put the cutting unit in either the transport or mowing position when hydraulic pressure is available.

When the lever is moved to the transport position, the blade brake is automatically activated so that the blades stop within about 5 seconds.

Lifting the Cutting Unit (Transport Position)

Pull the lever backwards to engage the transport position.The cutting unit will lift up and the blades stop rotating.

Secure the cutting unit if necessary using the mechanical lifting lever.

Lowering the Unit (Mowing Position)

If the cutting unit is secured in the transport position using the mechanical lifting lever, move the mechanical lifting lever to the cutting position.

Move the hydraulic lifting lever forwards to engage the cutting position. The unit is lowered and the blades begin to rotate.

In order to ensure that the hydraulic cylinder is in the outer position, hold the lever in the forward position for a half to one second.

Mechanical Lifting Lever for Cutting Unit

The lever is used as a backup lever to put the cutting unit in either the transport or mowing position when hydraulic pressure is unavailable. It can also be used to mechanically secure the cutting unit in the transport position.

The lever must be used when starting the engine, if the engine stopped with the unit in the mowing position, in order to raise the unit so that the start lock circuit is disengaged.

When the lever is moved to the transport position, the blade brake is automatically activated so that the blades stop within about 5 seconds.

Transport position

If the lever is pulled backwards the unit is raised and the blades automatically stop rotating (transport position).

Mowing Position

If the lock button is pressed in and the lever is moved forwards the unit will be lowered and the blades will automatically start to rotate (mowing position).

If this does not happen it is probably because the unit has been lifted with the hydraulic lifting lever. Lower the unit to the mowing position with the lever for the hydraulic lift.

Cutting height adjustment lever

The cutting height can be adjusted to 7 different positions with the cutting height lever.

It is important that the air pressure in both front wheels is equal, 60 kPa/8.5 PSI, to produce an even cutting height.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents 422Ts AWD Contents Pre-delivery service Service journalAfter the first 8 hours Introduction Symbols KEY to SymbolsKEY to Symbols Location of the controls What is WHAT?Safety instructions Safety InstructionsInsure your Rider General useThis is what you do Driving on slopesChildren MaintenanceTransport Presentation Cutting unit Cutting height adjustment leverLever for hydraulic lift of attachments Mechanical Lifting Lever for Cutting UnitExercise care and refuel outdoors see safety instructions Lights and power outletSeat FuelingBefore starting DrivingStart the engine Connecting the jump leads Starting the engine with a weak batteryRemove the cables in the reverse order Braking Driving the RiderStop the engine Maintenance schedule MaintenanceDaily Weekly At least Maintenance Once a Before Year Interval in hours StartingCheck front and rear wheel rotation speed according to Removing of the machine hoods CleaningAdjusting the parking brake Checking and adjusting the steering wiresCan result in reduced braking ability Checking and adjusting the choke wire Checking and adjusting of throttle wireReplacement of fuel filter Checking the fuel pump’s air filterReplacing the air filter Cleaning the engine and mufflerIgnition system Replacing the spark plugReplacing the light bulbs Check the safety systemMain fuse Checking the tyre pressure When the engine is running. Mind your fingersChecking the engine’s cooling air intake Replacing the centre belt AssemblyReplacing the front belt Trapping your hand Fitting the cutting headChecking the cutting unit’s parallelism Removing the cutting unitHands when working with the blades Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Placing in the service position Service position for the cutting unit15mm Hands when working with the blades Restoring from service positionChecking the blades Replacing the bladesLubrication Driver seat Lubricating the belt adjusterThrottle and choke cables, lever bearings Checking the engine’s oil levelChanging the oil filter Lubricate the hydrostatic cable with linksReplacing the engine oil Lubricate the parking brake wire Troubleshooting scheduleHydraulic oil filter change Checking the transmission oil levelEngine seems to have no power Problem CauseBattery does not charge Engine does not startElectrical system Electrical and Hydraulic SystemsHydraulic System Storage ServiceWinter storage GuardTechnical data Sound levels see note EC Declaration of Conformity Applies to Europe onlyVibration levels see note Page Page Original instructions 1156988-26 ´z+X§r¶6¨ ´z+X§r¶6¨

R 422Ts AWD specifications

The Husqvarna R 422Ts AWD is a versatile and robust riding lawn mower designed for homeowners seeking powerful performance and exceptional maneuverability. Engineered for a variety of terrains, this mower is particularly noted for its all-wheel drive (AWD) system, allowing for enhanced traction and stability, especially on slopes and uneven surfaces.

One of the standout features of the R 422Ts is its compact design, making it ideal for tighter spaces and smaller yards without sacrificing performance. This mower is equipped with a powerful 422cc engine, providing sufficient power to tackle dense grass and tough mowing conditions. The hydrostatic transmission ensures smooth and effortless speed control, giving users the ability to adjust their mowing pace according to the conditions.

The R 422Ts boasts a cutting width of 42 inches, allowing for efficient mowing coverage. Its effective cutting system utilizes a high-performance three-blade design, ensuring a clean and even cut with every pass. The mower's deck can be adjusted to several cutting heights, accommodating various grass types and seasonal changes.

Comfort and convenience are at the forefront of the R 422Ts design. The ergonomic seat is adjustable and cushioned, providing a comfortable ride even during extended mowing sessions. The intuitive instrument panel offers easy access to controls, including a choke, throttle, and electric starter, making operation straightforward for all users.

Additionally, the Husqvarna R 422Ts features a unique articulated steering system, which allows the rear wheels to follow the front wheels' path, resulting in tight turn capabilities. This design minimizes turf damage and maximizes efficiency, making it easier to navigate around obstacles.

The R 422Ts is compatible with various Husqvarna accessories, enhancing its versatility. Users can easily attach a mulch kit, bagger, or even a snow thrower, transforming this riding mower into an all-year-round utility vehicle.

In summary, the Husqvarna R 422Ts AWD combines power, precision, and adaptability. Its advanced features, including all-wheel drive, hydrostatic transmission, and ergonomic design, ensure that mowing is not only efficient but also enjoyable. Whether tackling a small yard or navigating complex landscaping, the R 422Ts stands out as an excellent choice for homeowners seeking a reliable mowing solution.
Top Page Image Contents