Husqvarna R 422Ts AWD EC Declaration of Conformity Applies to Europe only, Sound levels see note

Page 41

Technical data

Technical specifications for sound and vibration levels

 

Combi 112

Combi 122

 

 

 

Noise emissions (see note 2)

 

 

 

 

 

Sound power level, measured dB (A)

98

102

 

 

 

Sound power level, guaranteed dB(A)

99

103

 

 

 

Sound levels (see note 3)

 

 

 

 

 

Sound pressure level at the operators ear, dB(A)

83

88

 

 

 

Vibration levels (see note 4)

 

 

 

 

 

Vibration level on the steering wheel, m/s2

3.5

3.5

Vibration level in the seat, m/s2

0,7

0,7

Note 2: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB(A).

Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard deviation) of 0.2 m/s2 (steering wheel) and 0.8 m/s2 (seat).

IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned to the dealer or to an applicable station for recycling.

IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement improvements.

Note that no legal claims are valid on the basis of information in this manual.

Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.

EC Declaration of Conformity (Applies to Europe only)

Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel.: +46-36-146500, hereby declares that Husqvarna R 422 Ts AWD from 2014’s serial numbers and onwards (the year is clearly stated in plain text on the rating plate with subsequent serial number), complies with the requirements of the COUNCIL’S DIRECTIVE:

of May 17, 2006 ”relating to machinery” 2006/42/EC.

of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.

of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.

The following harmonised standards have been applied: EN ISO 12100-2, ISO 5395

Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, has issued reports regarding the assessment of conformity according to annex VI of the COUNCIL’S DIRECTIVE of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.

The certificates have the numbers: 01/901/137, 01/901/138

Huskvarna 19 may 2014

Claes Losdal, Development Manager/Garden Products

(Authorized representative for Husqvarna AB and responsible for technical documentation.)

English – 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents 422Ts AWD Contents After the first 8 hours Service journalPre-delivery service Introduction Symbols KEY to SymbolsKEY to Symbols Location of the controls What is WHAT?Safety instructions Safety InstructionsInsure your Rider General useThis is what you do Driving on slopesChildren MaintenanceTransport Presentation Cutting unit Cutting height adjustment leverLever for hydraulic lift of attachments Mechanical Lifting Lever for Cutting UnitExercise care and refuel outdoors see safety instructions Lights and power outletSeat FuelingStart the engine DrivingBefore starting Remove the cables in the reverse order Starting the engine with a weak batteryConnecting the jump leads Stop the engine Driving the RiderBraking Maintenance schedule MaintenanceDaily Weekly At least Maintenance Once a Before Year Interval in hours StartingCheck front and rear wheel rotation speed according to Removing of the machine hoods CleaningCan result in reduced braking ability Checking and adjusting the steering wiresAdjusting the parking brake Checking and adjusting the choke wire Checking and adjusting of throttle wireReplacement of fuel filter Checking the fuel pump’s air filterReplacing the air filter Cleaning the engine and mufflerIgnition system Replacing the spark plugMain fuse Check the safety systemReplacing the light bulbs Checking the engine’s cooling air intake When the engine is running. Mind your fingersChecking the tyre pressure Replacing the front belt AssemblyReplacing the centre belt Trapping your hand Fitting the cutting headChecking the cutting unit’s parallelism Removing the cutting unitReplacing the cutting unit belts Adjusting the parallelism of the cutting unitHands when working with the blades Placing in the service position Service position for the cutting unit15mm Hands when working with the blades Restoring from service positionChecking the blades Replacing the bladesLubrication Driver seat Lubricating the belt adjusterThrottle and choke cables, lever bearings Checking the engine’s oil levelReplacing the engine oil Lubricate the hydrostatic cable with linksChanging the oil filter Lubricate the parking brake wire Troubleshooting scheduleHydraulic oil filter change Checking the transmission oil levelEngine seems to have no power Problem CauseBattery does not charge Engine does not startElectrical system Electrical and Hydraulic SystemsHydraulic System Storage ServiceWinter storage GuardTechnical data Vibration levels see note EC Declaration of Conformity Applies to Europe onlySound levels see note Page Page Original instructions 1156988-26 ´z+X§r¶6¨ ´z+X§r¶6¨

R 422Ts AWD specifications

The Husqvarna R 422Ts AWD is a versatile and robust riding lawn mower designed for homeowners seeking powerful performance and exceptional maneuverability. Engineered for a variety of terrains, this mower is particularly noted for its all-wheel drive (AWD) system, allowing for enhanced traction and stability, especially on slopes and uneven surfaces.

One of the standout features of the R 422Ts is its compact design, making it ideal for tighter spaces and smaller yards without sacrificing performance. This mower is equipped with a powerful 422cc engine, providing sufficient power to tackle dense grass and tough mowing conditions. The hydrostatic transmission ensures smooth and effortless speed control, giving users the ability to adjust their mowing pace according to the conditions.

The R 422Ts boasts a cutting width of 42 inches, allowing for efficient mowing coverage. Its effective cutting system utilizes a high-performance three-blade design, ensuring a clean and even cut with every pass. The mower's deck can be adjusted to several cutting heights, accommodating various grass types and seasonal changes.

Comfort and convenience are at the forefront of the R 422Ts design. The ergonomic seat is adjustable and cushioned, providing a comfortable ride even during extended mowing sessions. The intuitive instrument panel offers easy access to controls, including a choke, throttle, and electric starter, making operation straightforward for all users.

Additionally, the Husqvarna R 422Ts features a unique articulated steering system, which allows the rear wheels to follow the front wheels' path, resulting in tight turn capabilities. This design minimizes turf damage and maximizes efficiency, making it easier to navigate around obstacles.

The R 422Ts is compatible with various Husqvarna accessories, enhancing its versatility. Users can easily attach a mulch kit, bagger, or even a snow thrower, transforming this riding mower into an all-year-round utility vehicle.

In summary, the Husqvarna R 422Ts AWD combines power, precision, and adaptability. Its advanced features, including all-wheel drive, hydrostatic transmission, and ergonomic design, ensure that mowing is not only efficient but also enjoyable. Whether tackling a small yard or navigating complex landscaping, the R 422Ts stands out as an excellent choice for homeowners seeking a reliable mowing solution.
Top Page Image Contents