Husqvarna R 422Ts AWD manual Introduction

Page 4

INTRODUCTION

Dear Customer,

Thank you for choosing a Husqvarna Rider. Husqvarna Riders are built to a unique design with a front-mounted cutting unit and a patented articulated steering. Riders are designed for maximum efficiency even in small or confined areas. The closely grouped controls and pedal-operated hydrostatic transmission also contribute to the performance of this machine.

This operator’s manual is a valuable document. By following its instructions (on operation, service, maintenance, etc.) you will significantly extend the life of the machine and even its second-hand value.

When you sell your Rider, make sure you pass on the operator’s manual to the new owner.

The last chapter in the operator’s manual consists of a Service Journal. Make sure that all service work and repairs are recorded. A well-documented service history reduces the costs of seasonal maintenance and influences the second-hand value of the machine. Bring the operator’s manual with the Rider when bringing it to a workshop for service procedures.

Driving and transport on public roads

Check the relevant road traffic regulations before driving the machine on a public road. If transporting the machine on another vehicle always use approved securing devices and make sure that the machine is securely held.

Towing

When your machine is equipped with a hydrostatic transmission you should only tow the machine over short distances and at a low speed, otherwise there is a risk of damaging the transmission.

The transmission must be disengaged when towing, see instructions under the heading Bypass valves.

Use

This ride-on mower is designed to mow grass on open and level ground surfaces. In addition, there is a number of accessories recommended by the manufacturer that broadens the application area. Please contact your dealer for more information about which accessories are available. The machine may only be used with the equipment recommended by the manufacturer. All other types of use are incorrect. Compliance with and strict adherence to the conditions of operation, service and repair as specified by the manufacturer also constitute essential elements of the intended use.

IMPORTANT INFORMATION The transmission warranty is only valid if front and rear wheel rotation speed has be checked in accordance with the service schedule. Adjust if necessary according to the table values specified in the workshop manual. Performed by authorized servicing dealer. The system will be damaged if this adjustment is not carried out. (Only AWD-machines)

This machine should be operated, serviced and repaired only by persons who are familiar with its particular characteristics and who are acquainted with the relevant safety procedures.

Accident prevention regulations, all other generally recognised regulations on safety and occupational medicine, and all road traffic regulations must be observed at all times.

Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any resulting damage or injury.

Good service

Husqvarna products are sold all over the world and ensures that you, the customer, get the best support and service. For example, before this machine was delivered it was inspected and adjusted by your dealer. See the certificate in the Service Journal in this manual.

Use only original spare parts for repairs. The use of other parts will invalidate the warranty.

When you need spare parts or advice on service issues, warranty terms, etc., contact:

This Operator’s Manual belongs to machine with serial number:

Engine

Transmission

On the machine's rating plate you will find the following information:

•The machines type designation.

•The manufacturer’s type number.

•The machine’s serial number.

State the type designation and serial number when ordering spare parts.

4 – English

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 422Ts AWD Contents Pre-delivery service Service journalAfter the first 8 hours Introduction KEY to Symbols SymbolsKEY to Symbols What is WHAT? Location of the controlsSafety Instructions Safety instructionsInsure your Rider General useDriving on slopes This is what you doMaintenance ChildrenTransport Presentation Cutting height adjustment lever Cutting unitLever for hydraulic lift of attachments Mechanical Lifting Lever for Cutting UnitLights and power outlet Exercise care and refuel outdoors see safety instructionsSeat FuelingBefore starting DrivingStart the engine Connecting the jump leads Starting the engine with a weak batteryRemove the cables in the reverse order Braking Driving the RiderStop the engine Maintenance Maintenance scheduleDaily Weekly At least Maintenance Once a Before Year Interval in hours StartingCheck front and rear wheel rotation speed according to Cleaning Removing of the machine hoodsAdjusting the parking brake Checking and adjusting the steering wiresCan result in reduced braking ability Checking and adjusting of throttle wire Checking and adjusting the choke wireReplacement of fuel filter Checking the fuel pump’s air filterCleaning the engine and muffler Replacing the air filterIgnition system Replacing the spark plugReplacing the light bulbs Check the safety systemMain fuse Checking the tyre pressure When the engine is running. Mind your fingersChecking the engine’s cooling air intake Replacing the centre belt AssemblyReplacing the front belt Fitting the cutting head Trapping your handRemoving the cutting unit Checking the cutting unit’s parallelismHands when working with the blades Adjusting the parallelism of the cutting unitReplacing the cutting unit belts Service position for the cutting unit Placing in the service positionRestoring from service position 15mm Hands when working with the bladesChecking the blades Replacing the bladesLubrication Lubricating the belt adjuster Driver seatThrottle and choke cables, lever bearings Checking the engine’s oil levelChanging the oil filter Lubricate the hydrostatic cable with linksReplacing the engine oil Troubleshooting schedule Lubricate the parking brake wireHydraulic oil filter change Checking the transmission oil levelProblem Cause Engine seems to have no powerBattery does not charge Engine does not startElectrical and Hydraulic Systems Electrical systemHydraulic System Service StorageWinter storage GuardTechnical data Sound levels see note EC Declaration of Conformity Applies to Europe onlyVibration levels see note Page Page 1156988-26 ´z+X§r¶6¨ ´z+X§r¶6¨ Original instructions

R 422Ts AWD specifications

The Husqvarna R 422Ts AWD is a versatile and robust riding lawn mower designed for homeowners seeking powerful performance and exceptional maneuverability. Engineered for a variety of terrains, this mower is particularly noted for its all-wheel drive (AWD) system, allowing for enhanced traction and stability, especially on slopes and uneven surfaces.

One of the standout features of the R 422Ts is its compact design, making it ideal for tighter spaces and smaller yards without sacrificing performance. This mower is equipped with a powerful 422cc engine, providing sufficient power to tackle dense grass and tough mowing conditions. The hydrostatic transmission ensures smooth and effortless speed control, giving users the ability to adjust their mowing pace according to the conditions.

The R 422Ts boasts a cutting width of 42 inches, allowing for efficient mowing coverage. Its effective cutting system utilizes a high-performance three-blade design, ensuring a clean and even cut with every pass. The mower's deck can be adjusted to several cutting heights, accommodating various grass types and seasonal changes.

Comfort and convenience are at the forefront of the R 422Ts design. The ergonomic seat is adjustable and cushioned, providing a comfortable ride even during extended mowing sessions. The intuitive instrument panel offers easy access to controls, including a choke, throttle, and electric starter, making operation straightforward for all users.

Additionally, the Husqvarna R 422Ts features a unique articulated steering system, which allows the rear wheels to follow the front wheels' path, resulting in tight turn capabilities. This design minimizes turf damage and maximizes efficiency, making it easier to navigate around obstacles.

The R 422Ts is compatible with various Husqvarna accessories, enhancing its versatility. Users can easily attach a mulch kit, bagger, or even a snow thrower, transforming this riding mower into an all-year-round utility vehicle.

In summary, the Husqvarna R 422Ts AWD combines power, precision, and adaptability. Its advanced features, including all-wheel drive, hydrostatic transmission, and ergonomic design, ensure that mowing is not only efficient but also enjoyable. Whether tackling a small yard or navigating complex landscaping, the R 422Ts stands out as an excellent choice for homeowners seeking a reliable mowing solution.
Top Page Image Contents