Husqvarna 325RDX, 323R, 325RX manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Clearing saws, brushcutters and trimmers can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of the operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

A protective helmet where there is a risk of falling objects

Approved hearing protection

Approved eye protection

Max. speed of output shaft, rpm

This product is in accordance with applicable CE directives.

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.

Machines fitted with saw blades or grass blades can be thrown violently to the side when the blade comes into contact with a fixed object. This is called blade thrust. The blade is capable of amputating an arm or leg. Always keep people and animals at least 15 metres from the machine.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

15 m 50FT

15 m 50FT

Only use non-metallic, flexible cutting attachments, i.e. trimmer heads with trimmer cord.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

The engine is switched off by moving the

stop switch to the stop position. CAUTION! The stop switch automatically returns to the start position. In order to prevent unintentional starting, the spark plug cap

must be removed from the spark plug when assembling, checking and/or performing maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

2 – English

1151416-95 Rev. 1 2008-12-23

Image 2
Contents 323R 325RX-series KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch Quick release Cutting attachment guardVibration damping system MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment Sharpening the saw blade Trimmer headFitting the handlebar 325Rx, 325RDx AssemblyFitting the handlebar 323R Assembling the cutting equipment AssemblyAssembling and dismantling the two-piece shaft 325RDx Fitting a blade guard, grass blade and grass cutterFitting the blade guard and saw blade Fitting a trimmer guard and Superauto II 1 trimmer headStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting StartingFor throttle handles with a start throttle lock StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingMaintenance CarburetorAdjusting the start throttle speed Fine adjustment of the idle speed TCorrectly adjusted carburetor High speed jet HBevel gear MufflerCooling system Two-piece shaft 325RDx Cleaning the air filterAir filter Spark plugMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataTechnical data 325RX 325RDX Engine MANUFACTURER′S Warranty Coverage Federal and California Emissions Control Warranty Statement Super Auto Page S35 095-.106 T35, T35x ´z+SIe¶5S¨ Page 1151416-95 ´z+SIe¶5S¨ ´z+SIe¶5S¨