Husqvarna 325RDX, 323R, 325RX manual Technical Data, Technical data

Page 29

TECHNICAL DATA

Technical data

Technical data

323R

323R (USA)

Engine

 

 

Cylinder displacement, cu.in/cm3

1,50/24,5

1,50/24,5

Cylinder bore, inch/mm

1,34/34,0

1,34/34,0

Stroke, inch/mm

1,06/27

1,06/27

Idle speed, rpm

2700

2700

Recommended max. fast idle speed, rpm

11000-11700

11000-11700

Speed of output shaft, rpm

8014

8014

Max. engine output, acc. to ISO 8893, kW/ rpm

0,9/9000

0,8/9000

Catalytic converter muffler

No

Yes

Speed-regulated ignition system

Yes

Yes

Ignition system

 

 

Manufacturer/type of ignition system

WalbroMB/SEM AM49

WalbroMB/SEM AM49

Spark plug

Champion RCJ 7Y

Champion RCJ 7Y

Electrode gap, inch/mm

0,02/0,5

0,02/0,5

Fuel and lubrication system

 

 

Manufacturer/type of carburetor

Zama C1Q

Zama C1Q

Fuel tank capacity, US pint/litre

1,06/0,5

1,06/0,5

Weight

 

 

Weight without fuel, cutting attachment and guard, Lbs/kg

9,9/4,5

9,9/4,5

Sound levels

(see note 1)

Equivalent sound pressure level at the users ear, measured 88/97 according to ANSI B175.3-1997, dB(A), min/max:

Vibration levels

 

Vibration levels at handles, measured according to

 

ANSI B175.3-1997, m/s2

 

At idle, left/right handles, min.:

2,0/2,0

At idle, left/right handles, max.:

3,2/2,7

At max. speed, left/right handles, min.:

2,2/2,5

At max. speed, left/right handles, max.:

6,0/8,5

88/97

2,0/2,0

3,2/2,7

2,2/2,5

6,0/8,5

Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

1151416-95 Rev. 1 2008-12-23

English – 29

Image 29
Contents 323R 325RX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentStop switch Vibration damping system Cutting attachment guardQuick release MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment Trimmer head Sharpening the saw bladeFitting the handlebar 325Rx, 325RDx AssemblyFitting the handlebar 323R Assembling and dismantling the two-piece shaft 325RDx AssemblyAssembling the cutting equipment Fitting a blade guard, grass blade and grass cutterFitting a trimmer guard and Superauto II 1 trimmer head Fitting the blade guard and saw bladeStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping For throttle handles with a start throttle lockWorking Techniques Basic safety rulesGeneral working instructions ABC of clearingWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headCarburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TAdjusting the start throttle speed High speed jet HBevel gear MufflerCooling system Air filter Cleaning the air filterTwo-piece shaft 325RDx Spark plugMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataTechnical data 325RX 325RDX Engine MANUFACTURER′S Warranty Coverage Federal and California Emissions Control Warranty Statement Super Auto Page S35 095-.106 T35, T35x ´z+SIe¶5S¨ Page 1151416-95 ´z+SIe¶5S¨ ´z+SIe¶5S¨