Husqvarna 305, 308 manual Connecting the transformer, Installation

Page 19
Connecting the transformer

3. INSTALLATION

If the installation is done in a working area with a steep slope (such as around a house on a hill), the charging station should be placed in the area at the bottom of the slope. This makes it easier for the robotic lawnmower to follow the guide wire to the charging station.

The charging station should not be placed on an island as this limits the laying of the guide wire in an optimal way. If the charging station has to be installed on an island, the guide wire also has to be connected to the island. See the illustration. Read more about islands in the 3.4 Installation of the boundary wire chapter.

Connecting the transformer

Take the following into consideration when planning where to place the transformer:

• Close to the charging station

• Protection from rain

• Protection from direct sunlight

If the transformer is connected to an electrical socket outdoors, this must be approved for outdoor use.

The low voltage cable for the transformer is 33 ft

(10 m) long, and may not be shortened or extended.

English - 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS Serial number PIN code Dealer Dealers telephone number MEMOIMPORTANT INFORMATION 1. Introduction and safety1. INTRODUCTION AND SAFETY 1.1 Introduction1.2 Symbols on the product Text IMPORTANT INFORMATION Text 1.3 Symbols in the Operator’s Manual1.4 Safety Instructions Transport 10 - English Maintenance2. PRESENTATION 2. PresentationThe numbers in the illustration represent 2.1 What is what?Capacity 2.2 FunctionMowing technique 14 - English Working methodLocating the charging station Movement pattern3.1 Preparations 3. Installation3. INSTALLATION Carry out the installation in the following stepsIdeal position for the charging station 3.2 Installation of the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the Do not tread or walk on the charging stations base plate 3.3 Charging the batteryInstallation and connecting the charging station The Automower cannot be used before the installation is completePlan where to lay the boundary wire 3.4 Installation of the boundary wireAbout 8” 20 cm around the fixed obstacle will not be mown Working area boundariesBoundaries within the working area Passages when mowingSecondary areas Slopes Loop for connecting the guide wire Laying the boundary wireSplicing the boundary wire Laying the boundary wire in towards the charging stationThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station 3.5 Connecting the boundary wire Maximum distance At least 30 cm At least 2 m 3.6 Installation of the guide wireLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation IMPORTANT INFORMATION Use MEMO on page 4 to make a note of the 3.8 First start-up and calibrationPIN code 3.9 Test docking with the charging station 4. USE 4.1 Charging a flat batteryRead the safety instructions before you start your robotic lawnmower 4. UseA = Max 16 h 4.2 Using the timerStandby ExampleOperation Charging/Standby 4.3 StartingA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h Restart 4.5 Switching off4.6 Adjusting the cutting height 4.4 Stopping5. CONTROL PANEL 5. Control panel3. MAN 5.1 Operation selection1. HOME 2. AUTO5.2 Multi-choice buttons 5.4 Main switch5.3 Numbers Browse between menus 6. Menu functions6. MENU FUNCTIONS 6.1 Main menuSettings 6.2 Menu structureTimer InstallationWork days 6.3 TimerReset timer Work hoursGuide width 6.4 InstallationTest settings Drive past wireRemote start WideMedium NarrowThe following five options can be selected Never 0% Test OUT Test settingsChange PIN code Drive past wire6.5 Security Test INMedium New loop signalWe recommend using the High security level at all times FunctionLanguage 6.6 SettingsReset user settings Time & DateInstallation proposals and settings Installation proposals and settings7. Garden examples 7. GARDEN EXAMPLES7. GARDEN EXAMPLES 54 - English 7. GARDEN EXAMPLES Robotic lawnmower 8. Maintenance8. MAINTENANCE 8.1 Winter storageCharging station 8.2 Service8.4 Cleaning 8.3 After winter storageBody Chassis and blade discChassis Wheels8.6 In the event of a thunderstorm 8.5 Transport and removal8.7 Blades Replacing the battery 8.8 BatteryMessage 9. Troubleshooting9. TROUBLESHOOTING 9.1 Messages62 - English Action Light 9.2 Indicator lamp in the charging stationAction 9.3 SymptomsSymptoms Causenot rotate lawnmower vibrateslawnmower runs, but the blade disc does9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 70 - English 5. When the break is found, the damaged sectionAutomower 10. Technical Data10. TECHNICAL DATA Data11. GUARANTEE TERMS 11. Guarantee terms12. Environmental information Page 115 59 ORIGINAL INSTRUCTIONS
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.
Top Page Image Contents