Husqvarna 308, 305 Indicator lamp in the charging station, Light, Troubleshooting, Cause, Action

Page 64
9.2Indicator lamp in the charging station

9.TROUBLESHOOTING

9.2Indicator lamp in the charging station

For a fully functional installation, the indicator lamp in the charging station must emit a solid green light. If something else appears, follow the troubleshooting guide below.

There is more troubleshooting help on www.automower.com. If you still need help with troubleshooting, please contact the local dealer.

Light

Cause

Action

 

 

 

 

 

 

Solid green light

Everything in order

No action required

 

 

 

Blue flashing light

The boundary wire is not connected

Check that the boundary wire

 

to the charging station

connector is fitted properly to the

 

 

charging station. See 3.5 Connecting

 

 

the boundary wire on page 28.

 

 

 

 

Break in the boundary wire.

Find out where the break is. Replace

 

 

the damaged section of the boundary

 

 

wire with a new loop wire and splice

 

 

using an original coupler.

 

 

 

Yellow flashing light

The guide wire is not connected to

Check that the guide wire connector

 

the charging station

is properly connected to the charging

 

 

station. See 3.6 Installation of the

 

 

guide wire on page 29.

 

 

 

 

Break in the guide wire

Find out where the break is. Replace

 

 

the damaged section of the guide

 

 

wire with a new loop wire and splice

 

 

using an original coupler.

 

 

 

Red flashing light

Interruption in the charging station's

Contact the local dealer.

 

antenna

 

 

 

 

Solid blue light

Weak signal as the boundary wire is

No steps have to be taken if the

 

too long. Max length is 250 metres.

mower operates as expected.

 

 

 

 

 

Shorten the boundary wire by

 

 

reducing the working area or

 

 

replacing islands with barriers the

 

 

mower can collide with.

 

 

 

 

Weak signal due to damaged

Since it is difficult to locate where the

 

boundary wire

wire is damaged it is recommended

 

 

to lay a new boundary wire for the

 

 

entire working area.

 

 

 

Solid red light

Defective circuit board in the charging

Contact the local dealer.

 

station

 

 

 

 

64 - English

Image 64
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS MEMO Serial number PIN code Dealer Dealers telephone number1. Introduction and safety 1. INTRODUCTION AND SAFETY1.1 Introduction IMPORTANT INFORMATION1.2 Symbols on the product 1.3 Symbols in the Operator’s Manual Text IMPORTANT INFORMATION Text1.4 Safety Instructions Transport Maintenance 10 - English2. Presentation 2. PRESENTATION2.1 What is what? The numbers in the illustration representCapacity 2.2 FunctionMowing technique Working method 14 - EnglishMovement pattern Locating the charging station3. Installation 3. INSTALLATIONCarry out the installation in the following steps 3.1 Preparations3.2 Installation of the charging station Ideal position for the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the 3.3 Charging the battery Installation and connecting the charging stationThe Automower cannot be used before the installation is complete Do not tread or walk on the charging stations base plate3.4 Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries About 8” 20 cm around the fixed obstacle will not be mownBoundaries within the working area Passages when mowingSecondary areas Slopes Laying the boundary wire Loop for connecting the guide wireSplicing the boundary wire Laying the boundary wire in towards the charging stationThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station 3.5 Connecting the boundary wire 3.6 Installation of the guide wire Maximum distance At least 30 cm At least 2 mLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation IMPORTANT INFORMATION Use MEMO on page 4 to make a note of the 3.8 First start-up and calibrationPIN code 3.9 Test docking with the charging station 4.1 Charging a flat battery Read the safety instructions before you start your robotic lawnmower4. Use 4. USE4.2 Using the timer StandbyExample A = Max 16 hOperation Charging/Standby 4.3 StartingA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h 4.5 Switching off 4.6 Adjusting the cutting height4.4 Stopping Restart5. Control panel 5. CONTROL PANEL5.1 Operation selection 1. HOME2. AUTO 3. MAN5.2 Multi-choice buttons 5.4 Main switch5.3 Numbers 6. Menu functions 6. MENU FUNCTIONS6.1 Main menu Browse between menus6.2 Menu structure TimerInstallation Settings6.3 Timer Reset timerWork hours Work days6.4 Installation Test settingsDrive past wire Guide widthWide MediumNarrow Remote startThe following five options can be selected Never 0% Test settings Test OUTDrive past wire 6.5 SecurityTest IN Change PIN codeNew loop signal We recommend using the High security level at all timesFunction Medium6.6 Settings Reset user settingsTime & Date LanguageInstallation proposals and settings 7. Garden examples7. GARDEN EXAMPLES Installation proposals and settingsInstallation proposals and settings 54 - English 7. GARDEN EXAMPLES 8. Maintenance 8. MAINTENANCE8.1 Winter storage Robotic lawnmower8.2 Service 8.4 Cleaning8.3 After winter storage Charging stationChassis and blade disc ChassisWheels Body8.6 In the event of a thunderstorm 8.5 Transport and removal8.7 Blades 8.8 Battery Replacing the battery9. Troubleshooting 9. TROUBLESHOOTING9.1 Messages Message62 - English 9. TROUBLESHOOTING 9.2 Indicator lamp in the charging station Light9.3 Symptoms SymptomsCause Actionlawnmower vibrates lawnmower runs, butthe blade disc does not rotate9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 5. When the break is found, the damaged section 70 - English10. Technical Data 10. TECHNICAL DATAData Automower11. GUARANTEE TERMS 11. Guarantee terms12. Environmental information Page ORIGINAL INSTRUCTIONS 115 59
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.