Husqvarna 305, 308 manual Troubleshooting, Messages, Cause, Action

Page 61
9.TROUBLESHOOTING

9.TROUBLESHOOTING

9.Troubleshooting

In this chapter, a number of messages are listed which may be shown in the display if there is a malfunction. There is a proposal as to the cause and steps to take for each message.

This chapter also presents some symptoms that can guide you if the mower does not work as expected.

More suggestions for steps to take in the event of malfunction or symptoms can be found on www.automower.com.

9.1 Messages

Below we have listed a number of messages which may be shown in the display of the Husqvarna robotic lawnmower. Contact your dealer if the same message appears often.

Message

Cause
Action

 

 

 

 

 

 

Wheel motor blocked,

Grass or other object has wrapped

Check the drive wheel and remove

left

around the drive wheel.

the grass or other object.

 

 

 

Wheel motor blocked,

Grass or other object has wrapped

Check the drive wheel and remove

right

around the drive wheel.

the grass or other object.

 

 

 

Cutting system

Grass or other object has wrapped

Check the blade disc and remove the

blocked

around the blade disc.

grass or other object.

 

 

 

 

The blade disc lies in a pool of water.

Move the mower and if possible

 

 

prevent the collection of water in the

 

 

working area.

 

 

 

No loop signal

The transformer is not connected.

Check the wall socket connection and

 

 

whether an earth-fault breaker has

 

 

tripped. Check that the low voltage

 

 

cable is connected to the charging

 

 

station.

 

 

 

 

The boundary wire is not connected

Check that the boundary wire

 

to the charging station.

connector is fitted properly to the

 

 

charging station. See 3.5 Connecting

 

 

the boundary wire on page 28.

 

 

 

 

Boundary wire broken.

Search interrupted, see 9.4 Finding

 

 

breaks in the loop wire on page 67.

 

 

Replace the damaged section of the

 

 

loop with a new loop wire and splice

 

 

using an original coupler.

 

 

 

 

The boundary wire is laid in the wrong

Check that the boundary wire has

 

direction around an island.

been laid according to the instructions

 

 

in chapter 3. Installation.

 

 

 

 

The connection between the robotic

Place the robotic lawnmower in the

 

lawnmower and the charging station

charging station and generate a new

 

has been broken.

loop signal via Security -> New loop

 

 

signal.

 

 

 

 

Disturbances from metal objects

Try moving the boundary wire.

 

(fences, reinforcement steel) or

 

 

buried cables close by.

 

 

 

 

English - 61

Image 61
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS Serial number PIN code Dealer Dealers telephone number MEMO1. INTRODUCTION AND SAFETY 1. Introduction and safety1.1 Introduction IMPORTANT INFORMATION1.2 Symbols on the product Text IMPORTANT INFORMATION Text 1.3 Symbols in the Operator’s Manual1.4 Safety Instructions Transport 10 - English Maintenance2. PRESENTATION 2. PresentationThe numbers in the illustration represent 2.1 What is what?Capacity 2.2 FunctionMowing technique 14 - English Working methodLocating the charging station Movement pattern3. INSTALLATION 3. InstallationCarry out the installation in the following steps 3.1 PreparationsIdeal position for the charging station 3.2 Installation of the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the Installation and connecting the charging station 3.3 Charging the batteryThe Automower cannot be used before the installation is complete Do not tread or walk on the charging stations base platePlan where to lay the boundary wire 3.4 Installation of the boundary wireAbout 8” 20 cm around the fixed obstacle will not be mown Working area boundariesBoundaries within the working area Passages when mowingSecondary areas Slopes Loop for connecting the guide wire Laying the boundary wireSplicing the boundary wire Laying the boundary wire in towards the charging stationThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station 3.5 Connecting the boundary wire Maximum distance At least 30 cm At least 2 m 3.6 Installation of the guide wireLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation IMPORTANT INFORMATION Use MEMO on page 4 to make a note of the 3.8 First start-up and calibrationPIN code 3.9 Test docking with the charging station Read the safety instructions before you start your robotic lawnmower 4.1 Charging a flat battery4. Use 4. USEStandby 4.2 Using the timerExample A = Max 16 hOperation Charging/Standby 4.3 StartingA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h 4.6 Adjusting the cutting height 4.5 Switching off4.4 Stopping Restart5. CONTROL PANEL 5. Control panel1. HOME 5.1 Operation selection2. AUTO 3. MAN5.2 Multi-choice buttons 5.4 Main switch5.3 Numbers 6. MENU FUNCTIONS 6. Menu functions6.1 Main menu Browse between menusTimer 6.2 Menu structureInstallation SettingsReset timer 6.3 TimerWork hours Work daysTest settings 6.4 InstallationDrive past wire Guide widthMedium WideNarrow Remote startThe following five options can be selected Never 0% Test OUT Test settings6.5 Security Drive past wireTest IN Change PIN codeWe recommend using the High security level at all times New loop signalFunction MediumReset user settings 6.6 SettingsTime & Date Language7. Garden examples Installation proposals and settings7. GARDEN EXAMPLES Installation proposals and settings7. GARDEN EXAMPLES 54 - English 7. GARDEN EXAMPLES 8. MAINTENANCE 8. Maintenance8.1 Winter storage Robotic lawnmower8.4 Cleaning 8.2 Service8.3 After winter storage Charging stationChassis Chassis and blade discWheels Body8.6 In the event of a thunderstorm 8.5 Transport and removal8.7 Blades Replacing the battery 8.8 Battery9. TROUBLESHOOTING 9. Troubleshooting9.1 Messages Message62 - English Message Light 9.2 Indicator lamp in the charging stationSymptoms 9.3 SymptomsCause Actionlawnmower runs, but lawnmower vibratesthe blade disc does not rotate9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 70 - English 5. When the break is found, the damaged section10. TECHNICAL DATA 10. Technical DataData Automower11. GUARANTEE TERMS 11. Guarantee terms12. Environmental information Page 115 59 ORIGINAL INSTRUCTIONS
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.