Husqvarna 305, 308 manual Troubleshooting, Message, Cause, Action

Page 63
Manual background

9. TROUBLESHOOTING

Message

Cause

Action

 

 

 

 

 

 

No drive

The robotic lawnmower has got

Free the mower and rectify the

 

caught in something.

reason for the lack of drive. If it is due

 

 

to wet grass, wait until the lawn has

 

 

dried before using the mower.

 

 

 

 

The working area includes a steep

Maximum guaranteed slope is 25%.

 

slope.

Steeper slopes should be isolated.

 

 

See 3.4 Installation of the boundary

 

 

wire on page 22.

 

 

 

 

The guide wire is not laid at an angle

If the guide wire is laid on a slope, it

 

on a slope.

must be laid at an angle across the

 

 

slope. See 3.6 Installation of the

 

 

guide wire on page 29.

 

 

 

Charging station

The contact between the charging

Put the robotic lawnmower in the

blocked

strips and contact strips may be poor

charging station and check that the

 

and the robotic lawnmower has made

charging strips and contact strips

 

a number attempts to charge.

make good contact.

 

 

 

 

An object is obstructing the robotic

Remove the object.

 

lawnmower.

 

 

 

 

Stuck in charging

There is an object in the way of the

Remove the object.

station

robotic lawnmower preventing it from

 

 

leaving the charging station.

 

 

 

 

Upside down

The robotic lawnmower is leaning too

Turn the mower the right way up.

 

much or has turned over.

 

 

 

 

Needs manual

The robotic lawnmower is set in the

Put the mower in the charging station.

charging

MAN operating mode.

This behaviour is normal and no

 

 

action is required.

 

 

 

Next start hh:mm

The timer setting prevents the mower

Change the timer settings. See

 

from operating.

6.3 Timer on page 44.

 

 

 

 

The rest period is in progress. The

This behaviour is normal and no

 

robotic lawnmower must dock in the

action is required.

 

charging station for at least 6 hours a

 

 

day (8 hours for the Automower® 305).

 

 

 

 

The day's mowing is

The rest period is in progress. The

This behaviour is normal and no

complete

robotic lawnmower must dock in the

action is required.

 

charging station for at least 6 hours a

 

 

day (8 hours for the Automower® 305).

 

 

 

 

English - 63

Image 63
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS Serial number PIN code Dealer Dealers telephone number MEMOIMPORTANT INFORMATION 1. Introduction and safety1. INTRODUCTION AND SAFETY 1.1 Introduction1.2 Symbols on the product Text IMPORTANT INFORMATION Text 1.3 Symbols in the Operator’s Manual1.4 Safety Instructions Transport 10 - English Maintenance2. PRESENTATION 2. PresentationThe numbers in the illustration represent 2.1 What is what?2.2 Function CapacityMowing technique 14 - English Working methodLocating the charging station Movement pattern3.1 Preparations 3. Installation3. INSTALLATION Carry out the installation in the following stepsIdeal position for the charging station 3.2 Installation of the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the Do not tread or walk on the charging stations base plate 3.3 Charging the batteryInstallation and connecting the charging station The Automower cannot be used before the installation is completePlan where to lay the boundary wire 3.4 Installation of the boundary wireAbout 8” 20 cm around the fixed obstacle will not be mown Working area boundariesPassages when mowing Boundaries within the working areaSecondary areas Slopes Loop for connecting the guide wire Laying the boundary wireLaying the boundary wire in towards the charging station Splicing the boundary wireThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station 3.5 Connecting the boundary wire Maximum distance At least 30 cm At least 2 m 3.6 Installation of the guide wireLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation 3.8 First start-up and calibration IMPORTANT INFORMATION Use MEMO on page 4 to make a note of thePIN code 3.9 Test docking with the charging station 4. USE 4.1 Charging a flat batteryRead the safety instructions before you start your robotic lawnmower 4. UseA = Max 16 h 4.2 Using the timerStandby Example4.3 Starting Operation Charging/StandbyA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h Restart 4.5 Switching off4.6 Adjusting the cutting height 4.4 Stopping5. CONTROL PANEL 5. Control panel3. MAN 5.1 Operation selection1. HOME 2. AUTO5.4 Main switch 5.2 Multi-choice buttons5.3 Numbers Browse between menus 6. Menu functions6. MENU FUNCTIONS 6.1 Main menuSettings 6.2 Menu structureTimer InstallationWork days 6.3 TimerReset timer Work hoursGuide width 6.4 InstallationTest settings Drive past wireRemote start WideMedium NarrowThe following five options can be selected Never 0% Test OUT Test settingsChange PIN code Drive past wire6.5 Security Test INMedium New loop signalWe recommend using the High security level at all times FunctionLanguage 6.6 SettingsReset user settings Time & DateInstallation proposals and settings Installation proposals and settings7. Garden examples 7. GARDEN EXAMPLES7. GARDEN EXAMPLES 54 - English 7. GARDEN EXAMPLES Robotic lawnmower 8. Maintenance8. MAINTENANCE 8.1 Winter storageCharging station 8.2 Service8.4 Cleaning 8.3 After winter storageBody Chassis and blade discChassis Wheels8.5 Transport and removal 8.6 In the event of a thunderstorm8.7 Blades Replacing the battery 8.8 BatteryMessage 9. Troubleshooting9. TROUBLESHOOTING 9.1 Messages62 - English Action Light 9.2 Indicator lamp in the charging stationAction 9.3 SymptomsSymptoms Causenot rotate lawnmower vibrateslawnmower runs, but the blade disc does9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 70 - English 5. When the break is found, the damaged sectionAutomower 10. Technical Data10. TECHNICAL DATA Data11. Guarantee terms 11. GUARANTEE TERMS12. Environmental information Page 115 59 ORIGINAL INSTRUCTIONS
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.