Husqvarna 305, 308 manual Charging the battery, Installation and connecting the charging station

Page 21
Installation and connecting the charging station

3. INSTALLATION

Installation and connecting the charging station

1.Position the charging station in a suitable spot.

2.Connect the low voltage cable to the charging

station.

3.Connect the transformer’s power cable to a 120V

(230 V) wall socket. If the wall socket is outdoors, it is important that the transformer is protected from direct sunlight.

4.Attach the charging station to the ground using the supplied screws. Ensure the screws are

screwed all the way down in the countersink.

IMPORTANT INFORMATION

It is not permitted to make new holes in the base plate Only the existing holes may be used to secure the base plate to the ground.

IMPORTANT INFORMATION

Do not tread or walk on the charging station's base plate.

3.3 Charging the battery

As soon as the charging station is connected, it is possible to charge the robotic lawnmower. Set the main switch to position 1.

Place the robotic lawnmower in the charging station to charge the battery while the boundary and guide wires are being laid.

If the battery is flat, it takes around 80 to 100 minutes to fully charge it.

IMPORTANT INFORMATION

The Automower® cannot be used before the installation is complete.

English - 21

Image 21
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS Serial number PIN code Dealer Dealers telephone number MEMO1. INTRODUCTION AND SAFETY 1. Introduction and safety1.1 Introduction IMPORTANT INFORMATION1.2 Symbols on the product Text IMPORTANT INFORMATION Text 1.3 Symbols in the Operator’s Manual1.4 Safety Instructions Transport 10 - English Maintenance2. PRESENTATION 2. PresentationThe numbers in the illustration represent 2.1 What is what?2.2 Function CapacityMowing technique 14 - English Working methodLocating the charging station Movement pattern3. INSTALLATION 3. InstallationCarry out the installation in the following steps 3.1 PreparationsIdeal position for the charging station 3.2 Installation of the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the Installation and connecting the charging station 3.3 Charging the batteryThe Automower cannot be used before the installation is complete Do not tread or walk on the charging stations base platePlan where to lay the boundary wire 3.4 Installation of the boundary wireAbout 8” 20 cm around the fixed obstacle will not be mown Working area boundariesPassages when mowing Boundaries within the working areaSecondary areas Slopes Loop for connecting the guide wire Laying the boundary wireLaying the boundary wire in towards the charging station Splicing the boundary wireThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station 3.5 Connecting the boundary wire Maximum distance At least 30 cm At least 2 m 3.6 Installation of the guide wireLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation 3.8 First start-up and calibration IMPORTANT INFORMATION Use MEMO on page 4 to make a note of thePIN code 3.9 Test docking with the charging station Read the safety instructions before you start your robotic lawnmower 4.1 Charging a flat battery4. Use 4. USEStandby 4.2 Using the timerExample A = Max 16 h4.3 Starting Operation Charging/StandbyA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h 4.6 Adjusting the cutting height 4.5 Switching off4.4 Stopping Restart5. CONTROL PANEL 5. Control panel1. HOME 5.1 Operation selection2. AUTO 3. MAN5.4 Main switch 5.2 Multi-choice buttons5.3 Numbers 6. MENU FUNCTIONS 6. Menu functions6.1 Main menu Browse between menusTimer 6.2 Menu structureInstallation SettingsReset timer 6.3 TimerWork hours Work daysTest settings 6.4 InstallationDrive past wire Guide widthMedium WideNarrow Remote startThe following five options can be selected Never 0% Test OUT Test settings6.5 Security Drive past wireTest IN Change PIN codeWe recommend using the High security level at all times New loop signalFunction MediumReset user settings 6.6 SettingsTime & Date Language7. Garden examples Installation proposals and settings7. GARDEN EXAMPLES Installation proposals and settings7. GARDEN EXAMPLES 54 - English 7. GARDEN EXAMPLES 8. MAINTENANCE 8. Maintenance8.1 Winter storage Robotic lawnmower8.4 Cleaning 8.2 Service8.3 After winter storage Charging stationChassis Chassis and blade discWheels Body8.5 Transport and removal 8.6 In the event of a thunderstorm8.7 Blades Replacing the battery 8.8 Battery9. TROUBLESHOOTING 9. Troubleshooting9.1 Messages Message62 - English Message Light 9.2 Indicator lamp in the charging stationSymptoms 9.3 SymptomsCause Actionlawnmower runs, but lawnmower vibratesthe blade disc does not rotate9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 70 - English 5. When the break is found, the damaged section10. TECHNICAL DATA 10. Technical DataData Automower11. Guarantee terms 11. GUARANTEE TERMS12. Environmental information Page 115 59 ORIGINAL INSTRUCTIONS
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.