Husqvarna 308, 305 manual Laying and connecting the guide wire, Installation

Page 30
Laying and connecting the guide wire

3. INSTALLATION

Laying and connecting the guide wire

1.Run the wire through the slot in the bottom of the

charger plate.

2.Fit the connector to the guide wire in the same way as for the boundary wire described in

3.5 Connecting the boundary wire. Connect it to

the contact pin on the charging station that is labelled 'Guide'.

3.Run the wire at least 7 ft (2 m) straight out from

the front edge of the plate.

If the guide wire must be laid in a passage:

-The robotic lawnmower follows the guide wire on the same side of the wire to and from the charging station. This means that the robotic lawnmower always runs on the left hand side of the guide wire, as seen facing the charging station.

30 - English

Page 29 Page 31
Image 30
Page 29 Page 31
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS MEMO Serial number PIN code Dealer Dealers telephone number1.1 Introduction 1. Introduction and safety1. INTRODUCTION AND SAFETY IMPORTANT INFORMATION1.2 Symbols on the product 1.3 Symbols in the Operator’s Manual Text IMPORTANT INFORMATION Text1.4 Safety Instructions Transport Maintenance 10 - English2. Presentation 2. PRESENTATION2.1 What is what? The numbers in the illustration represent2.2 Function CapacityMowing technique Working method 14 - EnglishMovement pattern Locating the charging stationCarry out the installation in the following steps 3. Installation3. INSTALLATION 3.1 Preparations3.2 Installation of the charging station Ideal position for the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the The Automower cannot be used before the installation is complete 3.3 Charging the batteryInstallation and connecting the charging station Do not tread or walk on the charging stations base plate3.4 Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries About 8” 20 cm around the fixed obstacle will not be mownPassages when mowing Boundaries within the working areaSecondary areas Slopes Laying the boundary wire Loop for connecting the guide wireLaying the boundary wire in towards the charging station Splicing the boundary wireThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station 3.5 Connecting the boundary wire 3.6 Installation of the guide wire Maximum distance At least 30 cm At least 2 mLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation 3.8 First start-up and calibration IMPORTANT INFORMATION Use MEMO on page 4 to make a note of thePIN code 3.9 Test docking with the charging station 4. Use 4.1 Charging a flat batteryRead the safety instructions before you start your robotic lawnmower 4. USEExample 4.2 Using the timerStandby A = Max 16 h4.3 Starting Operation Charging/StandbyA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h 4.4 Stopping 4.5 Switching off4.6 Adjusting the cutting height Restart5. Control panel 5. CONTROL PANEL2. AUTO 5.1 Operation selection1. HOME 3. MAN5.4 Main switch 5.2 Multi-choice buttons5.3 Numbers 6.1 Main menu 6. Menu functions6. MENU FUNCTIONS Browse between menusInstallation 6.2 Menu structureTimer SettingsWork hours 6.3 TimerReset timer Work daysDrive past wire 6.4 InstallationTest settings Guide widthNarrow WideMedium Remote startThe following five options can be selected Never 0% Test settings Test OUTTest IN Drive past wire6.5 Security Change PIN codeFunction New loop signalWe recommend using the High security level at all times MediumTime & Date 6.6 SettingsReset user settings Language7. GARDEN EXAMPLES Installation proposals and settings7. Garden examples Installation proposals and settingsInstallation proposals and settings 54 - English 7. GARDEN EXAMPLES 8.1 Winter storage 8. Maintenance8. MAINTENANCE Robotic lawnmower8.3 After winter storage 8.2 Service8.4 Cleaning Charging stationWheels Chassis and blade discChassis Body8.5 Transport and removal 8.6 In the event of a thunderstorm8.7 Blades 8.8 Battery Replacing the battery9.1 Messages 9. Troubleshooting9. TROUBLESHOOTING Message62 - English Cause 9.2 Indicator lamp in the charging station LightCause 9.3 SymptomsSymptoms Actionthe blade disc does lawnmower vibrateslawnmower runs, but not rotate9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 5. When the break is found, the damaged section 70 - EnglishData 10. Technical Data10. TECHNICAL DATA Automower11. Guarantee terms 11. GUARANTEE TERMS12. Environmental information Page ORIGINAL INSTRUCTIONS 115 59
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.
Top Page Image Contents