Husqvarna 308, 305 manual Checking the installation, Installation, Important Information

Page 32
3.7 Checking the installation

3.INSTALLATION

6.Connect the guide wire to the boundary wire

using a coupler:

Insert the boundary wire in each of the holes in the coupler. Insert the guide wire in the centre hole in the coupler. Check that the wires are fully inserted into the coupler so that the ends are visible through the transparent area on the other side of the coupler.

Use pliers to completely compress the button on the coupler.

It does not matter which holes are used to connect each wire.

7.Staple down/bury the connector in the lawn.

IMPORTANT INFORMATION

The function of the guide wire varies depending on the layout of the working area. This is why it is recommended to test the installation using this function . See

6.4 Installation on page 45.

IMPORTANT INFORMATION

The guide wire may not cross the boundary wire, for instance a boundary wire that is laid out to an island.

3.7 Checking the installation

Check the loop signal by inspecting the indicator lamp on the charging station.

• Solid green light = good signals.

• Flashing blue light = interruption in the boundary loop, no signal.

• Flashing yellow light = interruption in the guide loop, no guide signal.

• Flashing red light = interruption in the charging station's antenna plate. Contact the dealer for assistance, see Memo on page 4.

•Solid blue light = weak signal. This may depend on the boundary loop being too long or that the wire is damaged. If the robotic lawnmower still works, this is not a problem.

•Solid red light = fault in a circuit board in the charging station. The fault should be rectified by an authorized dealer.

See 9.2 Indicator lamp in the charging station on page 64 if the lamp does not indicate a solid green light.

32 - English

Page 31 Page 33
Image 32
Page 31 Page 33
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS MEMO Serial number PIN code Dealer Dealers telephone number1. Introduction and safety 1. INTRODUCTION AND SAFETY1.1 Introduction IMPORTANT INFORMATION1.2 Symbols on the product 1.3 Symbols in the Operator’s Manual Text IMPORTANT INFORMATION Text1.4 Safety Instructions Transport Maintenance 10 - English2. Presentation 2. PRESENTATION2.1 What is what? The numbers in the illustration representMowing technique 2.2 FunctionCapacity Working method 14 - EnglishMovement pattern Locating the charging station3. Installation 3. INSTALLATIONCarry out the installation in the following steps 3.1 Preparations3.2 Installation of the charging station Ideal position for the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the 3.3 Charging the battery Installation and connecting the charging stationThe Automower cannot be used before the installation is complete Do not tread or walk on the charging stations base plate3.4 Installation of the boundary wire Plan where to lay the boundary wireWorking area boundaries About 8” 20 cm around the fixed obstacle will not be mownSecondary areas Passages when mowingBoundaries within the working area Slopes Laying the boundary wire Loop for connecting the guide wireThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station Laying the boundary wire in towards the charging stationSplicing the boundary wire 3.5 Connecting the boundary wire 3.6 Installation of the guide wire Maximum distance At least 30 cm At least 2 mLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation PIN code 3.8 First start-up and calibrationIMPORTANT INFORMATION Use MEMO on page 4 to make a note of the 3.9 Test docking with the charging station 4.1 Charging a flat battery Read the safety instructions before you start your robotic lawnmower4. Use 4. USE4.2 Using the timer StandbyExample A = Max 16 hA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h 4.3 StartingOperation Charging/Standby 4.5 Switching off 4.6 Adjusting the cutting height4.4 Stopping Restart5. Control panel 5. CONTROL PANEL5.1 Operation selection 1. HOME2. AUTO 3. MAN5.3 Numbers 5.4 Main switch5.2 Multi-choice buttons 6. Menu functions 6. MENU FUNCTIONS6.1 Main menu Browse between menus6.2 Menu structure TimerInstallation Settings6.3 Timer Reset timerWork hours Work days6.4 Installation Test settingsDrive past wire Guide widthWide MediumNarrow Remote startThe following five options can be selected Never 0% Test settings Test OUTDrive past wire 6.5 SecurityTest IN Change PIN codeNew loop signal We recommend using the High security level at all timesFunction Medium6.6 Settings Reset user settingsTime & Date LanguageInstallation proposals and settings 7. Garden examples7. GARDEN EXAMPLES Installation proposals and settingsInstallation proposals and settings 54 - English 7. GARDEN EXAMPLES 8. Maintenance 8. MAINTENANCE8.1 Winter storage Robotic lawnmower8.2 Service 8.4 Cleaning8.3 After winter storage Charging stationChassis and blade disc ChassisWheels Body8.7 Blades 8.5 Transport and removal8.6 In the event of a thunderstorm 8.8 Battery Replacing the battery9. Troubleshooting 9. TROUBLESHOOTING9.1 Messages Message62 - English 9. TROUBLESHOOTING 9.2 Indicator lamp in the charging station Light9.3 Symptoms SymptomsCause Actionlawnmower vibrates lawnmower runs, butthe blade disc does not rotate9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 5. When the break is found, the damaged section 70 - English10. Technical Data 10. TECHNICAL DATAData Automower12. Environmental information 11. Guarantee terms11. GUARANTEE TERMS Page ORIGINAL INSTRUCTIONS 115 59
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.
Top Page Image Contents