Husqvarna 305 Symptoms, Cause, Action, The robotic lawn, mower has difficulty, docking with the

Page 65
9.3 Symptoms

9. TROUBLESHOOTING

9.3 Symptoms

If your Automower® does not work as expected, follow the troubleshooting guide below.

There is a FAQ (Frequently Asked Questions) on www.automower.com which provides more detailed answers to a number of standard questions. It you still cannot find the reason for the fault, contact the local dealer.

Symptoms

Cause

Action

 

 

 

 

 

 

The robotic lawn

The boundary wire is not laid in a long

Check that the charging station has

mower has difficulty

straight line that is far enough out

been installed according to the

docking with the

from the charging station.

instructions in 3.2 Installation of the

charging station

 

charging station on page 17.

 

 

 

 

The guide wire is not inserted in the

It is absolutely critical for operation

 

slot at the bottom of the charging

that the guide wire is perfectly straight

 

station.

and is in the correct position under

 

 

the charging station. Therefore make

 

 

sure that the guide wire is always in

 

 

its slot in the charging station. See

 

 

3.6 Installation of the guide wire.

 

 

 

 

The charging station is on a slope

Place the charging station on a

 

 

surface that is entirely level. See

 

 

3.2 Installation of the charging station

 

 

on page 17.

 

 

 

Uneven mowing

The robotic lawnmower works too few

Increase the mowing time. See

results

hours per day.

6.3 Timer on page44.

 

 

 

 

The proportion setting is incorrect in

Check that the correct Proportion

 

relation to the layout of the working

value is selected. See 6.4 Installation

 

area

on page 45.

 

 

 

 

The shape of the working area

Also use Remote start 2 to steer the

 

requires the use of both Remote start

robotic lawnmower to a remote area.

 

1 and Remote start 2 for the robotic

See 6.4 Installation on page 45.

 

lawnmower to find its way to all

 

 

remote areas.

 

 

 

 

 

Working area too large.

Try limiting the working area or

 

 

extending the working time. See

 

 

6.3 Timer on page 44.

 

 

 

 

Dull blades.

Replace all the blades and screws so

 

 

that the rotating parts are balanced.

 

 

See 8.7 Blades on page 59.

 

 

 

 

Long grass in relation to the set

Increase the cutting height and then

 

cutting height.

successively lower.

 

 

 

 

Accumulation of grass by the blade

Check that the blade disc rotates

 

disc or around the motor shaft.

freely and easily. If not, screw off the

 

 

blade disc and remove grass and

 

 

foreign objects. See 8.4 Cleaning.

 

 

 

The robotic

The robotic lawnmower clock needs

Set the clock. See 6.6 Settings on

lawnmower runs at

to be set.

page 51.

the wrong time

 

 

The start and stop times for mowing

Reset the start time and stop time

 

 

are incorrect.

settings for mowing. See 6.3 Timer

 

 

on page 44.

 

 

 

English - 65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents HUSQVARNA AUTOMOWER 305/308 OPERATOR’S MANUAL Page TABLE OF CONTENTS Serial number PIN code Dealer Dealers telephone number MEMO1. INTRODUCTION AND SAFETY 1. Introduction and safety1.1 Introduction IMPORTANT INFORMATION1.2 Symbols on the product Text IMPORTANT INFORMATION Text 1.3 Symbols in the Operator’s Manual1.4 Safety Instructions Transport 10 - English Maintenance2. PRESENTATION 2. PresentationThe numbers in the illustration represent 2.1 What is what?Mowing technique 2.2 FunctionCapacity 14 - English Working methodLocating the charging station Movement pattern3. INSTALLATION 3. InstallationCarry out the installation in the following steps 3.1 PreparationsIdeal position for the charging station 3.2 Installation of the charging stationDo not put the charging station in a corner in the working area Connecting the transformer Do not, under any circumstances, mount the Installation and connecting the charging station 3.3 Charging the batteryThe Automower cannot be used before the installation is complete Do not tread or walk on the charging stations base platePlan where to lay the boundary wire 3.4 Installation of the boundary wireAbout 8” 20 cm around the fixed obstacle will not be mown Working area boundariesSecondary areas Passages when mowingBoundaries within the working area Slopes Loop for connecting the guide wire Laying the boundary wireThe boundary wire must be laid in line with the rear end of the charging station and at least 5 ft 1.5 m straight out to the right and left of the station. See the illustration. If the boundary wire is laid in any other way, the robotic lawnmower may find it hard to find the charging station Laying the boundary wire in towards the charging stationSplicing the boundary wire 3.5 Connecting the boundary wire Maximum distance At least 30 cm At least 2 m 3.6 Installation of the guide wireLaying and connecting the guide wire Maximum distance At least 30 cm At least 2 m 3.7 Checking the installation PIN code 3.8 First start-up and calibrationIMPORTANT INFORMATION Use MEMO on page 4 to make a note of the 3.9 Test docking with the charging station Read the safety instructions before you start your robotic lawnmower 4.1 Charging a flat battery4. Use 4. USEStandby 4.2 Using the timerExample A = Max 16 hA + C = Max 16 h B + D = Min 8 h A + C = Max 18 h B + D = Min 6 h 4.3 StartingOperation Charging/Standby 4.6 Adjusting the cutting height 4.5 Switching off4.4 Stopping Restart5. CONTROL PANEL 5. Control panel1. HOME 5.1 Operation selection2. AUTO 3. MAN5.3 Numbers 5.4 Main switch5.2 Multi-choice buttons 6. MENU FUNCTIONS 6. Menu functions6.1 Main menu Browse between menusTimer 6.2 Menu structureInstallation SettingsReset timer 6.3 TimerWork hours Work daysTest settings 6.4 InstallationDrive past wire Guide widthMedium WideNarrow Remote startThe following five options can be selected Never 0% Test OUT Test settings6.5 Security Drive past wireTest IN Change PIN codeWe recommend using the High security level at all times New loop signalFunction MediumReset user settings 6.6 SettingsTime & Date Language7. Garden examples Installation proposals and settings7. GARDEN EXAMPLES Installation proposals and settings7. GARDEN EXAMPLES 54 - English 7. GARDEN EXAMPLES 8. MAINTENANCE 8. Maintenance8.1 Winter storage Robotic lawnmower8.4 Cleaning 8.2 Service8.3 After winter storage Charging stationChassis Chassis and blade discWheels Body8.7 Blades 8.5 Transport and removal8.6 In the event of a thunderstorm Replacing the battery 8.8 Battery9. TROUBLESHOOTING 9. Troubleshooting9.1 Messages Message62 - English Message Light 9.2 Indicator lamp in the charging stationSymptoms 9.3 SymptomsCause Actionlawnmower runs, but lawnmower vibratesthe blade disc does not rotate9.4 Finding breaks in the loop wire guide wire and the boundary wire in the charging station 4. a Assume that the indicator lamp flashed yellow in test a above. Reset all connections to their original positions. Then disconnect A2. Connect 70 - English 5. When the break is found, the damaged section10. TECHNICAL DATA 10. Technical DataData Automower12. Environmental information 11. Guarantee terms11. GUARANTEE TERMS Page 115 59 ORIGINAL INSTRUCTIONS
Related manuals
Manual 72 pages 56.21 Kb Manual 2 pages 60.87 Kb Manual 78 pages 38.21 Kb

305, 308 specifications

The Husqvarna 308 is a powerful representation of modern lawn mower technology, designed for homeowners and professionals looking for efficiency and performance. It combines advanced engineering with user-friendly features, making lawn care an enjoyable task.

One of the standout features of the Husqvarna 308 is its robust cutting deck, which typically measures 48 inches. This generous width allows users to cover large areas in a shorter time, contributing to an overall enhanced mowing experience. The cutting height can be easily adjusted, accommodating various grass types and user preferences.

Equipped with a strong Honda engine, the Husqvarna 308 delivers reliable performance. The engine is known for its efficiency, providing ample power while ensuring low fuel consumption. This not only helps in maintaining the lawn but also reduces the overall operating costs.

The mower features a hydrostatic transmission, which offers seamless speed control. Users can easily adjust their speed without having to change gears, allowing for a more intuitive mowing experience. This feature is particularly beneficial for navigating around obstacles or adjusting speed when tackling hilly terrains.

Comfort is another priority in the design of the Husqvarna 308. The operator station is ergonomically designed, including an adjustable seat, steering wheel, and controls that are easy to reach. This ensures that users can operate the mower for extended periods without experiencing fatigue.

Safety features are built into the Husqvarna 308 as well, including automatic blade brake systems that ensure the blades stop quickly when the operator leaves the seat. This feature provides peace of mind, especially in households with children or pets.

The mower is also known for its durability, built with high-quality materials that withstand the rigors of regular use. The exterior is designed to resist rust and corrosion, ensuring a longer lifespan for the mower.

Additionally, the Husqvarna 308 is compatible with various attachments, such as baggers and mulch kits, allowing for versatility in lawn care. The intuitive design and advanced features make it a top choice for those looking to maintain a pristine lawn with ease and efficiency.

In summary, the Husqvarna 308 is a well-rounded lawn mower that combines power, comfort, and safety. Its advanced technologies and thoughtful design cater to both novice and experienced users, demonstrating Husqvarna's commitment to quality and innovation in outdoor power equipment.
Top Page Image Contents