Husqvarna 230 ACX, 220 AC manual Fault symptom

9. TROUBLE SHOOTING

9.2 Fault symptom

If your Automower does not work correctly, follow the trouble shooting guide below. If the fault persists; contact your dealer.

Symptom	Cause	Action
Uneven mowing	Automower works too few hours per	Increase the mowing time, see 6.4
results	day.	Timer (2) on page 47.
	Working area too large.	Try limiting the working area or
		extending the working time, see 6.4
		Timer (2) on page 47.
	Dull blades.	Replace all the blades and screws so
		that the rotating parts are balanced.
	Long grass in relation to the set	Increase the cutting height and then
	cutting height.	successively lower.
	The mower seems to work more at	Change the Garden shape (3-3)
	the top of a slope than at the bottom.	setting to Open.
	Accumulation of grass by the blade	Check that the skid plate and blade
	disc or around the motor shaft.	disc rotate easily. If not, the skid plate
		and perhaps the blade disc must be
		removed and the grass and foreign
		objects removed. See 8.5 Cleaning
		on page 70.
Automower runs at	The clock on Automower needs to be	Set the clock, see Time and date
the wrong time	set.	(4-4)on page 62.
	The start and stop times for mowing	Adjust the start and stop time settings
	are incorrect.	for mowing, see 6.4 Timer (2) on
		page 47.
Automower vibrates	Unbalanced blade disc or damaged	Inspect the blades and screws and
	blades.	replace them if necessary.
Automower runs, but	Automower is looking for the charging	No action. The blade disc does not
the blade disc does	station.	rotate when the mower is searching
not rotate		for the charging station.
The mower mows for	Grass or a foreign object is blocking	Dismantle and clean the skid plate
shorter periods than	the blade disc or skid plate.	and blade disc.
usual between
charges
Both the mowing and	This behaviour is normal in high	No action.
charging times are	temperatures (gradually increasing
shorter than usual	above 25 °C).

English - 75