Husqvarna 220 AC, 230 ACX manual Time and date, Set time, Set date, Time format, Date format

Page 61

6. MENU FUNCTIONS

Time and date (4-4)

Using this function you can change the time and date on Automower.

You can also change the format selections you made when Automower was first started via this function.

•Set time (4-4-1)

Move the cursor to Set time and press YES. Now enter the correct time and finish with YES.

•Set date (4-4-2)

Move the cursor to Set date and press YES. Now enter the correct date and finish with YES.

•Time format (4-4-3)

Move the cursor to Time format and press YES. Move the cursor to the required time format:

•12h

•24h

Finish by pressing YES.

•Date format (4-4-4)

Move the cursor to Date format and press YES. Move the cursor to the required date format:

•YY-MM-DD(year-month-day)

•MM-DD-YY(month-day-year)

•DD-MM-YY(day-month-year)

Finish by pressing YES.

Security

Sounds

Language

Time and date

4-4

Set time

Set date

Time format

Date format

4-4-

62 - English

Image 61

Contents Husqvarna Automower 230 ACX/220 AC OPERATOR’S Manual Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Symbols in the Operator’s Manual Use Safety instructionsTransport MaintenancePresentation Numbers in the picture correspond to Automower, what’s what?Capacity Function of AutomowerMowing technique Working method 3012-388 3012-700 3012-400 Movement pattern Search methodSearch method 1 Irregular Search method 3 Follow guide wire Search method 2 Follow boundary wireMore than one Automower in a garden One Automower in several gardensCarry out the installation in the following steps InstallationPreparations Installation of the charging stationIdeal position of the charging station Low voltage cable must not be extended Installation and connecting the charging station Do not tread or walk on the charging station plate Installation of the boundary wire Charging the batteryBest position for the boundary wire Boundaries for the working area 30cm10 cm Secondary areas Boundaries within the working areaPassages when searching for the charging station Passages when mowingSlopes Laying out the boundary wire 3012-281 Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire 3012-284 3012-264 3012-265 3012-507 Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º Use Charging a discharged batteryStarting Automower Using the timerStopping Automower Restart Switching off AutomowerRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Select ProgramsNumbers Main switchMain menu Menu functionsBrowse between menus Number seriesAutomower main menu Commands TimerTimer CommandsDay timer Timer overrideWeekend timer Garden Week timerMon Tue Wed Thu Fri Sat Sun Run all Exit angles Proportion first Follow loopFollow loop out Distance DirectionProportion Follow loop Corridor width Test OUT TestOpen Garden shapeNormal ComplexAdvanced Drive past wireCheck loop Security SettingsPIN code Time lock Stop protection Sounds Settings lockOperation KeypadSound Significance LanguageSet time Time and dateSet date Time formatGarden example Proposed installation and settings3012-543 3012-544 3012-545 Corridor width Guide 1 This example only applies to 230 ACX 3012-687 Battery MaintenanceWinter storage ServiceAfter winter storage AutomowerDo not use running water when cleaning CleaningUnderframe and blade disc ChassisWheels Replacing the bladesBody 3012-260 Fault messages Trouble shootingTrouble Shooting Fault symptom Environmental Information Technical dataData Automower 230 ACX Automower 220 AC EU Declaration of Conformity only applies to Europe EU declaration of conformityEU Declaration of Conformity Auto IndexFollow loop Follow loop out Shortcuts Control panel Menus Working area Boundaries 115 03