Husqvarna 230 ACX, 220 AC manual Do not tread or walk on the charging station plate

Page 20

3. INSTALLATION

3.Connect the low voltage cable to the charging station.

Only use original cable and transformer.

4.Connect the low voltage cable to the transformer.

The connectors may be slightly difficult to connect, as they are moisture-proof.

5.Connect the transformer’s power cord to a 230V wall socket. It is preferable to use an earth-fault breaker as recommended.

IMPORTANT INFORMATION

Do not tread or walk on the charging station plate.

3012-263

3012-262

3012-533

English - 21

Image 20

Contents Husqvarna Automower 230 ACX/220 AC OPERATOR’S Manual Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toMowing technique Function of AutomowerCapacity Working method 3012-388 3012-700 3012-400 Search method 1 Irregular Search methodMovement pattern Search method 2 Follow boundary wire Search method 3 Follow guide wireMore than one Automower in a garden One Automower in several gardensInstallation Carry out the installation in the following steps Ideal position of the charging station Installation of the charging station Preparations Low voltage cable must not be extended Installation and connecting the charging station Do not tread or walk on the charging station plate Best position for the boundary wire Charging the batteryInstallation of the boundary wire 30cm Boundaries for the working area10 cm Boundaries within the working area Secondary areasSlopes Passages when mowingPassages when searching for the charging station Laying out the boundary wire 3012-281 Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire 3012-284 3012-264 3012-265 3012-507 Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Charging a discharged battery UseStopping Automower Using the timerStarting Automower Switching off Automower RestartRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Programs SelectMain switch NumbersMenu functions Main menuBrowse between menus Number seriesCommands Timer Automower main menuCommands TimerWeekend timer Timer overrideDay timer Mon Tue Wed Thu Fri Sat Sun Run all Week timerGarden Exit angles Follow loop out Follow loopProportion first Proportion DirectionDistance Follow loop Corridor width Test Test OUTGarden shape OpenNormal ComplexCheck loop Drive past wireAdvanced Settings SecurityPIN code Time lockStop protection Settings lock SoundsOperation KeypadLanguage Sound SignificanceTime and date Set timeSet date Time formatProposed installation and settings Garden example3012-543 3012-544 3012-545 Corridor width Guide 1 This example only applies to 230 ACX 3012-687 Maintenance BatteryService Winter storageAfter winter storage AutomowerCleaning Do not use running water when cleaningUnderframe and blade disc ChassisBody Replacing the bladesWheels 3012-260 Trouble shooting Fault messagesTrouble Shooting Fault symptom Data Automower 230 ACX Automower 220 AC Technical dataEnvironmental Information EU declaration of conformity EU Declaration of Conformity only applies to EuropeEU Declaration of Conformity Index AutoFollow loop Follow loop out Shortcuts Control panel Menus Working area Boundaries 115 03