2. PRESENTATION
The STOP button on the top of Automower is mainly used to stop the mower when it’s running. When the STOP button is pressed a cover opens, behind which there is a control panel. The STOP button remains depressed until the cover is closed again. This acts as start inhibitor.
The control panel on the top of Automower is where you manage all the mower settings. The main switch is also located on the control panel. Open the control panel cover by pressing down the STOP button.
When the main switch is turned ON for the first time, a
The selected PIN code must then be entered each time the main switch is moved to the ON position. This
Automower can enter a sleep mode to save power. The display on the control panel is then completely dimmed.
The sleep mode is activated 25 minutes after the STOP button has been pressed and then not reset to the operating mode. Automower is then activated by switching the main switch off and on.
The sleep mode can also be activated in the event of a fault occurring during mowing or charging and which is not rectified within 25 minutes. Automower is then activated by pressing the STOP button.
3012-388
3012-700
3012-400
14 - English