Husqvarna 230 ACX/220 AC manual Language, Sound Significance

Page 61

6. MENU FUNCTIONS

Sound	Significance


2 beeps/10 seconds	Charging

5 beeps over 2 seconds	Starting blade disc

3 beeps/second	Fault message

One long beep	Blade disc blocked

Short click sound	A button on the keypad has been pressed

Muffled long beep	Incorrect input

	The mower is removed from the charging station
	manually while charging is in progress.

Short double beep	A change to the setting has been made

	The mower is placed in the charging station
	manually.

Language (4-3)

Using this function you can change the language selection you made when Automower was first started.

To select the language: Move the cursor to Language and press YES. Now move the cursor to the required language and press YES.

Security

Sounds

Language

Time and date

4-3

62 - English

Image 61

Contents Husqvarna Automower 230 ACX/220 AC OPERATOR’S Manual Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Symbols in the Operator’s Manual Use Safety instructionsTransport MaintenancePresentation Numbers in the picture correspond to Automower, what’s what?Capacity Function of AutomowerMowing technique Working method 3012-388 3012-700 3012-400 Movement pattern Search methodSearch method 1 Irregular Search method 3 Follow guide wire Search method 2 Follow boundary wireOne Automower in several gardens More than one Automower in a gardenCarry out the installation in the following steps InstallationPreparations Installation of the charging stationIdeal position of the charging station Transformer is for indoor use only Low voltage cable must not be extended3012-744 Do not tread or walk on the charging station plate Installation and connecting the charging stationInstallation of the boundary wire Charging the batteryBest position for the boundary wire Boundaries for the working area 3012-459US Secondary areas Boundaries within the working areaPassages when searching for the charging station Passages when mowingSlopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire 3012-284 3012-264 3012-265 3012-507 Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º Use Charging a discharged batteryStarting Automower Using the timerStopping Automower Restart Switching off AutomowerRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Select ProgramsNumbers Main switchMain menu Menu functionsBrowse between menus Number seriesAutomower main menu Commands Timer Garden SettingsTimer CommandsDay timer Timer overrideWeekend timer Garden Week timerMon Tue Wed Thu Fri Sat Sun Run all Exit angles Proportion first Follow loopFollow loop out Distance DirectionProportion Follow loop Corridor width Test OUT TestOpen Garden shapeNormal ComplexAdvanced Drive past wireCheck loop Security SettingsPIN code Time lockStop protection Sounds Settings lockOperation KeypadSound Significance LanguageSet time Time and dateSet date Time formatGarden example Proposed installation and settings3012-543 3012-544 3012-545US Corridor width Guide 1 This example only applies to 230 ACX 3012-687US Battery MaintenanceWinter storage ServiceAfter winter storage AutomowerUnderframe and blade disc CleaningReplacing the blades Do not use running water when cleaningChassis Wheels3012-260 Fault messages Trouble shootingTrouble Shooting Fault symptom Data Automower 230 ACX Automower 220 AC Technical dataSerial number Personal code Dealer Dealer’s telephone number Environmental InformationAuto IndexFollow loop Follow loop out Shortcuts Control panel Menus Working area Boundaries 115 03