Husqvarna 230 ACX/220 AC manual Adjusting the cutting height

Page 40

4. USE

4.7 Adjusting the cutting height

The cutting height can be varied from MIN (0.8") to MAX (2.5").

If the grass is long it is appropriate to let Automower start mowing at the MAX cutting height. Once the grass is shorter, you can gradually lower the cutting height.

To adjust the cutting height:

1.Press the STOP button to stop the mower.

2.Open the cutting height adjustment cover:

Press down the catch button and then open the cover.

3.Turn the knob to the required position. The selected position is the marking on the knob that aligns with the arrow on the body.

•Turn clockwise to raise the cutting height.

•Turn anticlockwise to lower the cutting height.

4.Close the cover. Ensure that the catch button locks.

3012-698

3012-391

3012-253

English - 41

Image 40

Contents Husqvarna Automower 230 ACX/220 AC OPERATOR’S Manual Table of Contents Table of Contents Introduction Safety IntroductionSymbols on Automower Symbols in the Operator’s Manual Safety instructions UseMaintenance TransportPresentation Automower, what’s what? Numbers in the picture correspond toCapacity Function of AutomowerMowing technique Working method 3012-388 3012-700 3012-400 Movement pattern Search methodSearch method 1 Irregular Search method 2 Follow boundary wire Search method 3 Follow guide wireMore than one Automower in a garden One Automower in several gardensInstallation Carry out the installation in the following stepsPreparations Installation of the charging stationIdeal position of the charging station Low voltage cable must not be extended Transformer is for indoor use only3012-744 Installation and connecting the charging station Do not tread or walk on the charging station plateInstallation of the boundary wire Charging the batteryBest position for the boundary wire Boundaries for the working area 3012-459US Boundaries within the working area Secondary areasPassages when mowing Passages when searching for the charging stationSlopes Laying out the boundary wire Laying the boundary wire in towards the charging station Joining the boundary wireConnecting the boundary wire 3012-284 3012-264 3012-265 3012-507 Checking the installation Linking Automower to the charging stationInstallation of the guide wire Need of a guide wirePlacement and connection of the guide wire Maximum 135º Charging a discharged battery UseStarting Automower Using the timerStopping Automower Switching off Automower RestartRestart within 20 seconds Restart after more than 20 secondsAdjusting the cutting height Control panel Shortcuts Programs SelectMain switch NumbersMenu functions Main menuBrowse between menus Number seriesCommands Timer Garden Settings Automower main menuCommands TimerDay timer Timer overrideWeekend timer Garden Week timerMon Tue Wed Thu Fri Sat Sun Run all Exit angles Proportion first Follow loopFollow loop out Distance DirectionProportion Follow loop Corridor width Test Test OUTGarden shape OpenNormal ComplexAdvanced Drive past wireCheck loop Settings SecurityPIN code Time lockStop protection Settings lock SoundsOperation KeypadLanguage Sound SignificanceTime and date Set timeSet date Time formatProposed installation and settings Garden example3012-543 3012-544 3012-545US Corridor width Guide 1 This example only applies to 230 ACX 3012-687US Maintenance BatteryService Winter storageAfter winter storage AutomowerCleaning Underframe and blade discDo not use running water when cleaning Replacing the bladesChassis Wheels3012-260 Trouble shooting Fault messagesTrouble Shooting Fault symptom Technical data Data Automower 230 ACX Automower 220 ACEnvironmental Information Serial number Personal code Dealer Dealer’s telephone numberIndex AutoFollow loop Follow loop out Shortcuts Control panel Menus Working area Boundaries 115 03