Husqvarna 230 ACX/220 AC manual 3012-284 3012-264 3012-265 3012-507

Page 31

3. INSTALLATION

3.Place the cable ends in the connector:

•Open the connector.

•Place the wire in the connector grip.

4.Press the connector together using a pair of pliers. Press until you hear a click.

5.Cut off any surplus boundary wire. Cut 0.4" - 0.8" above respective connectors.

6.Press the connector onto the contact pin, marked A, on the charging station.

IMPORTANT INFORMATION

The right hand connector should be connected on the right hand contact pin on the charging station and vice versa.

3012-284

3012-264

3012-265

3012-507

32 - English

Image 31

Contents Husqvarna Automower 230 ACX/220 AC OPERATOR’S Manual Table of Contents Table of Contents Introduction Introduction SafetySymbols on Automower Symbols in the Operator’s Manual Use Safety instructionsTransport MaintenancePresentation Numbers in the picture correspond to Automower, what’s what?Capacity Function of AutomowerMowing technique Working method 3012-388 3012-700 3012-400 Movement pattern Search methodSearch method 1 Irregular Search method 3 Follow guide wire Search method 2 Follow boundary wireOne Automower in several gardens More than one Automower in a gardenCarry out the installation in the following steps InstallationPreparations Installation of the charging stationIdeal position of the charging station Transformer is for indoor use only Low voltage cable must not be extended3012-744 Do not tread or walk on the charging station plate Installation and connecting the charging stationInstallation of the boundary wire Charging the batteryBest position for the boundary wire Boundaries for the working area 3012-459US Secondary areas Boundaries within the working areaPassages when searching for the charging station Passages when mowingSlopes Laying out the boundary wire Joining the boundary wire Laying the boundary wire in towards the charging stationConnecting the boundary wire 3012-284 3012-264 3012-265 3012-507 Linking Automower to the charging station Checking the installationNeed of a guide wire Installation of the guide wirePlacement and connection of the guide wire Maximum 135º Use Charging a discharged batteryStarting Automower Using the timerStopping Automower Restart after more than 20 seconds Switching off AutomowerRestart Restart within 20 secondsAdjusting the cutting height Control panel Shortcuts Select ProgramsNumbers Main switchNumber series Menu functionsMain menu Browse between menusAutomower main menu Commands Timer Garden SettingsTimer CommandsDay timer Timer overrideWeekend timer Garden Week timerMon Tue Wed Thu Fri Sat Sun Run all Exit angles Proportion first Follow loopFollow loop out Distance DirectionProportion Follow loop Corridor width Test OUT TestComplex Garden shapeOpen NormalAdvanced Drive past wireCheck loop Time lock SettingsSecurity PIN codeStop protection Keypad Settings lockSounds OperationSound Significance LanguageTime format Time and dateSet time Set dateGarden example Proposed installation and settings3012-543 3012-544 3012-545US Corridor width Guide 1 This example only applies to 230 ACX 3012-687US Battery MaintenanceAutomower ServiceWinter storage After winter storageUnderframe and blade disc CleaningWheels Do not use running water when cleaningReplacing the blades Chassis3012-260 Fault messages Trouble shootingTrouble Shooting Fault symptom Data Automower 230 ACX Automower 220 AC Technical dataSerial number Personal code Dealer Dealer’s telephone number Environmental InformationAuto IndexFollow loop Follow loop out Shortcuts Control panel Menus Working area Boundaries 115 03