3. INSTALLATION
The boundary wire must not be crossed on the path to and from an island.
Laying the boundary wire in towards the charging station
The boundary wire can be routed in several different ways in towards the charging station. The best alternative is to route the wire completely outside the charging station, see alternative 1. The wire can also be placed under the charging station plate as shown in alternative 2 in the illustration. However, the wire should not be placed outside alternative 2 because it can then be difficult for Automower to find the charging station.
When connecting to the charging station, the right end of the boundary wire should be guided into the
Joining the boundary wire
If the boundary wire is not long enough and needs to be spliced: Use original solderless coupler. It is waterproof and gives a reliable electrical connection.
To splice: Insert both cable ends in the coupler. Now press down the button on top of the connector fully. Use a pair of pliers or the like, as the button on the connector is difficult to press down by hand.
IMPORTANT INFORMATION
Twisted cables, or a screw terminal
1. |
2. |
30 - English