You can set if Smart Viewer is automatically connected to the selected DVR or site when starting the program. If you check Auto Connection Enable, available DVRs and sites are displayed in the
Language
You can set the language to be displayed on Smart Viewer.
Site Setup
Click Site Setup for configuring the
1 | 4 |
3
2 | 5 |
1.The registered DVRs are displayed.
2.You can use the buttons for adding/deleting/ editing DVRs.
3.Use the button to move the selected DVR to the selected site. But, if the selected DVR is set to ADSL Network, it cannot be moved to the site.
4.The registered sites are displayed.
5.You can use the buttons for adding/deleting/ editing sites.
56_ Smart Viewer
The DVRs that you want to connect using Smart Viewer are listed in DVR List. You can register a new DVR, or delete/edit the selected DVR. The name and IP/MAC address of the registered DVR are displayed. If the DVR uses a static IP, select Static IP in Address Type, enter the name of DVR in Name, and the IP address in IP Address.
Set the port number in Port No. so that it matches the port number that you’ve set in the network menu of DVR. For connecting to the DVR, you need to set both Admin password and user password.
If your DVR uses a dynamic IP such as in a cable modem, VDSL, and PPPoE for ADSL, set the address in MAC Address.
Set the port number in Port No. so that it matches the port number that you’ve set in the network menu of DVR.
If you have selected Use DDNS in the