Samsung SHR-5082P Camera Connection Indication Window, Screen Split Selection Buttons, Sequence Mode Button, Monitoring State Display, Blue:, Yellow:, Monitoring

Camera Connection Indication Window

The window displays the connection state of DVR and the connected cameras.

Yellow: When Smart Viewer is successfully connected to a DVR. When the camera is connected for monitoring.

Black: When Smart Viewer cannot be connected to a DVR.

Blue: When Smart Viewer can connect to a DVR but it is disconnected now.

Screen Split Selection Buttons

The buttons present modes like full screen, single, 4-split, 9-split, and 16-split modes. You can change to any of them under monitoring.

Sequence Mode Button

When this button is selected, screens are switched at a preset interval. The interval can be set in Monitoring of Setup Menu. In Single Mode, the channel numbers are sequentially switched from 1 to 16. In Quad (4-split) Mode, the screens are changed like 1st 4 channels (1,2,3,4) --> 2nd 4 channels (5,6,7,8) --> 3rd 4 channels (9,10,11,12) --> 4th 4 channels (13,14,15,16). In 9-split Mode, the screens are changed from 9 channels (1,2,3,4,5,6,7,8,9) to 7 channels (10,11,12,13,14,15,16). In 16-split Mode, the screen refreshes at the preset interval.

62_ Smart Viewer

Monitoring State Display

The screen split status and playing status are displayed on the screen.: When monitoring in Quad Mode: When monitoring in Single Mode: Cameras are turned Off

The numbers in the screen icons indicate the screen positions in Smart Viewer.

:The orange icon indicates that the current channel is connected to a specific camera.

:The gray icon indicates that the current channel is connected to a camera but not displayed in the screen.

:The black icon with a slash indicates that the current channel is not connected to any camera.