PTZ camera control
PTZ CAMERA CONTROL MODE
You have to check that proper PTZ camera settings are allocated for PTZ device setup in the Camera menu.
Cam | ID | Protocol | Baudrate | Parity | Data | Stop | |||
1 | 000 | Samsung | 38400 | None | 8 | 1 |
| ||
|
|
|
|
|
|
|
|
|
|
2 | 001 | Vic | 38400 | None | 8 | 1 |
| ||
|
|
|
|
|
|
|
|
|
|
3 | 002 | Pan. | 19200 | None | 8 | 1 |
| ||
4 | 003 | AD | 38400 | None | 8 | 1 |
| ||
5 | 004 | Phi. | 38400 | None | 8 | 1 |
| ||
|
|
|
|
|
|
|
|
|
|
6 | 005 | Ern. | 38400 | None | 8 | 1 |
| ||
7 | 006 | 19200 | None | 8 | 1 |
| |||
|
|
|
|
|
|
|
|
|
|
8 | 007 | 19200 | None | 8 | 1 |
| |||
Serial Mode: |
|
|
|
|
|
|
|
| |
Half Duplex |
|
| OK |
|
| Cancel |
| ||
In case of
When the PTZ configuration is complete, the PTZ sign ( PTZ ) appears on the live screen.
If you press the ENTER button in the split screen, a blue bar appears for selection handling. Use the Direction buttons to move this bar until you reach the channel having the PTZ sign, and press the PTZ button on the front panel or remote control to enter the PTZ Camera Control Mode. In PTZ Camera Control Mode, the color of the PTZ sign changes to yellow from white. In this mode, you can pan and tilt the camera, and zoom in the screen.
PTZAnother PTZ camera control is executed in a single screen. Press the channel number button on the front panel or remote control to select the
the PTZ button. In Single Screen PTZ Camera Control Mode, the PTZ sign changes to yellow from white. You can pan and tilt the camera, and zoom in the screen. It also supports the miscellaneous functions like Preset, Camera Menu, and etc.
2007 - 03 - 11 09:27:16
CAM 01
Press the PTZ button in the live mode to cancel the PTZ camera control function. After cancellation, the PTZ sign on the Auto Sequences to white from yellow.
You cannot use the PTZ device and remote control device at the same time due to communication problems.
In PTZ control mode, the PTZ mode of DVR is canceled when the remote control is connected. When the remote control is disconnected, it changes to PTZ mode. Refer to the user manual for the remote control to control the PTZ device using the remote control.
When using the remote control that is run by Samsung protocol, the direct camera control is enabled.
If there is no PTZ control activity within maximum 5 minutes, the PTZ mode is automatically cancelled. Then it is controlled by the Smart Viewer.
BASIC PTZ OPERATIONS
When using a remote control, it is possible to control the camera with the remote control run by Samsung protocol. If there is no PTZ control for 5 minutes from the DVR, this mode is automatically cancelled. Then it is controlled by the Smart Viewer.
PTZ