SPOT-OUT MONITORING
When the events occur sequentially, the channel of the camera that the last event has been issued is displayed. (In case of alarms, multiple channels are enabled.)
When multiple cameras are connected, the camera with the smallest number is output on
In the live screen, you can select a
Press the STOP button on the front panel or remote control and press a button out of 16 channels. The selected channel is set to a
When you press the STOP button and then the MODE button within 2 seconds, the
SPOT2 output is the same output as the main video out. (OSG is not displayed).
CAUTION | or it is out of order, the system | |
displays an error ( ) saying “built- | ||
| ||
| in HDD error” at the | |
| In this case, you cannot perform | |
| recording, playback, and backup. | |
| So please contact the service | |
| personnel. |
If the fans in the product do not properly operate or have some problem, the fan error message appears on the live screen as shown in the following picture. In this case, check whether the fans normally run or not. When the fans are recovered,
the Failure icon (
LIVE 04