Samsung SHR-5082P SHR-5080, SHR-5160, Bracket-HDD, 12_ installation, There are brackets, Before starting this work, remove the power cord from the outlet

SHR-5080, SHR-5160

Before starting this work, remove the power cord from the outlet.

1.Take out the screws on the left and right sides (5 spots for each side) and on the rear (1 spot).

2.Remove the cover from the product. (Slide the cover slightly backward, lift it upward and remove it.)

3.There are brackets (Bracket-HDD) mounted on the right and left sides where you can

mount HDDs. Remove the screws holding each bracket to mount an HDD onto.Bracket-HDD

4.If you want to add a hard disk, remove Bracket- HDD, power supply cable, signal transmission cable (IDE Cable), and fan cable.

12_ installation