Samsung SHR-5082P CONNECTING THE USB, CONNECTING THE ALARM INPUT/OUTPUT, Connecting to Internet through ADSL, should be set to Master, it as FAT32 using your PC

Connecting to Internet through ADSL

CONNECTING 03

CONNECTING THE USB

1.There are two USB connecting ports on the front and rear panels of the product.

2.USB Hard Disk, USB CD/DVD, and USB Memory can be connected through any of those ports.

3.If the USB HDD is connected to the system, it should be detected and set through Menu > System > Storage Setup before operation.

4.The product provides the HOT PLUG feature that allows the connection/removal of USB devices during system operation.

	 The USB type of hard disk
CAUTION	should be set to Master.
	 If the backup USB device cannot
	be formatted in the DVR, format
	it as FAT32 using your PC.

For more details, refer to the System section in Chapter 5 Menu Setup.

CONNECTING THE ALARM INPUT/OUTPUT

The Alarm IN/OUT ports on the rear of the product have the following elements:

5080/5082 Alarm IN/OUT Ports5160/5162 Alarm IN/OUT Ports

ALARM IN 1 to 8 (SHR-5080/5082): Alarm input port

ALARM IN 1 to 16 (SHR-5160/5162): Alarm input Port

ALARM RESET: When receiving an ALARM RESET signal, the system clears the current ALARM input or output signal and resumes alarm sensing.

ALARM OUT 1 to 4: Alarm output ports

connecting _15