Samsung SHR-5082P SCHEDULE, Video Loss Detection Setup, Record Schedule, ALL, ENTER, Holiday, Duration, Duration, Holiday, Alarm-Out, Duration, Alarm-Out, Duration

Sensitivity

This is used to set the sensitivity for motion detection. Available values are Low, Medium, and Very High.

Alarm-Out

It is used to set the Alarm-Out location when any alarm occurs. Currently 4 Alarm Outs are available. Select an alarm-out to synchronize with the current sensor. But multiple values can be selected.

Duration

It is used to set the Alarm-Out duration. When an alarm occurs, the alarm is output for the preset time. You can select any of Off, 3sec, 5sec, 10sec, 20sec, 30sec, and Continuous.

In case of SHR-5082/5080, only 8 channels are displayed.

Video Loss Detection Setup

You can configure the video loss related settings. If any video loss is detected, the corresponding alarm will be issued.

Video Loss Detection Setup

Cam	Video Loss State	Alarm-Out		Duration
1	Off	1			10sec
2	Off	2			10sec
3	Off	3			10sec
4	Off	4			10sec
5	Off	None			10sec
6	Off	None			10sec
7	Off	None			10sec
8	Off	None			10sec
		9-16	OK			Cancel

Video Loss State-Off: Video loss detection does not operate.-On: Video loss detection is active.

Alarm-Out

It is used to set the Alarm-Out location when any video loss is detected. Currently 4 Alarm Outs are available.

Duration

It is used to set the Alarm-Out duration. When an alarm occurs, the alarm is output for the preset time. You can select any of Off, 3sec, 5sec, 10sec, 20sec, 30sec, and Continuous.

In case of SHR-5082/5080, only 8 channels are displayed.

SCHEDULE

You can configure the scheduling-related settings here.32_ menu setup

Record Schedule

The scheduling is enabled by selecting days and time blocks. The default setting is Event Recording. Recording automatically starts according to the schedule.

Record Schedule

All

S

M

T

W

T

F

S

H

Continuous Recording
Event Recording	Holiday	OK	Cancel
Both(Continuous, Event)

CH >: Copies the value of Channel 1 to all the channels after this is pressed.0 to 23: Time values for horizontal row.S to H: Days (Sunday to Saturday) and Holiday (H).

ALL: Press this and it changes the overall settings in the current window to Continuous, Event Record, and Both in order.

Continuous Recording

Recording follows the settings configured in Record Mode. For furthermore information, see “Schedule Recording” in Chapter 7. It is displayed in yellow, while the event recording is displayed in blue and both recording in red. When nothing is assigned, it is displayed in gray.

Event Recording

Recording automatically starts when an event (alarm, motion detection, and video loss) occurs within a setup time. Recording follows the settings configured in Event Record. For more information, see “Event Recording” in Chapter 7.

Both(Continuous, Event)Both recordings are applied at the same time.Holiday

If you press Holiday, a calendar window appears for you to designate holidays. Place the cursor to a date and press the ENTER button, then you can set the date or Nth day of the month as a holiday. (You can also set both options as holidays

Holiday Setup

			Feb
Sun	Mon				Sat
		Feb / 08
					3
4	5	Feb / 2nd / Thu			10
11	12				17
18	19	OK		Cancel	24
25	26

OK Cancel

In case of SHR-5082/5080, only 8 channels are displayed.