The preset function is supported by all cameras. You can set up to 20 presets. But an active directory (AD) protocol camera can have 7 presets.
The names of 2,3, and 4 may vary depending on the camera vendor. And those functions may not be supported by some product.
Samsung cameras support those functions.
In case of Panasonic cameras, the names of AUTOPAN, SCAN, and PATTERN are as following:
2 SEQUENCE 3 AUTOPAN 4 SORT.
In case of PELCO cameras, the names of AUTOPAN, SCAN, and PATTERN are as following:
2 FRAME SCAN 3 AUTO SCAN
4 PATTERN.
The other cameras do not support those functions.
Self Menu Setup of PTZ device
1
1.You can configure the
1
2
3
1.This is the camera self menu screen.
The screen can be shown on Smart Viewer.
2.Use the Direction buttons for movement between menus.
3.The button operates the same as the ENTER button.
The Camera Menu Setup function is supported for Samsung and Panasonic cameras only.
When a DVR is using the PTZ camera
CAUTION controls, Smart Viewer cannot control the PTZ camera. The PTZ camera
controls can be used by the Admin user.
Smart Viewer _65