Samsung SNC-B5395P Switch, Switch

3Switch 3 (H-REV) : When this switch is set to ON, the camera image is reversed horizontally. If you want to monitor your site using a mirror, you can use this feature to see the right image.

4Switch 4 (V-REV) : When this switch is set to ON, the camera image is reversed vertically. If your camera reluctantly displays the vertically reversed image, you can use this feature to see the right image.

5Switch 5 (BLC) : When this switch is set to ON, you can view a clear image even though the camera faces any excessive light such as sunlight and fluorescent light. When it is set to OFF, the subject with excessive light is not clearly shown.

6Switch 6 (FL) : When this switch is set to ON, the shutter speed is fixed to 1/100 sec (for NTSC) or 1/120 sec (for PAL) to prevent screen from flickering by the disaccordance between vertical synchronous frequency (50Hz for NTSC, 60Hz for PAL) and on-and-off frequency of a light.

7Switch 7 (D/N) : When this switch is set to ON, the camera automatically switches between color and B&W according to the brightness of the vicinity.

8Switch 8 (AWB) : This switch adjusts white balancing. When this switch is set to ON, this camera operates in ATW mode, and in case of OFF, this camera operates in AWC mode.

ATW (Auto Tracking White Balance):

The color temperature is automatically adjusted according to the environmental change. (Approx. 2000°K to 11,000°K)

AWC (Auto White Balance Control):

It stores the color temperature just when the switch is changed to OFF. Accordingly color temperatures are adjusted by the stored value.

10_ Installation and Connection